DEV Community

Cover image for Podman for Docker Users
appfleet profile image Dmitriy A.
Dmitriy A. for appfleet

Posted on • Originally published at appfleet.com

Podman for Docker Users

#docker #devops

Podman is the command-line interface tool that lets you interact with Libpod, a library for running and managing OCI-based containers. It is important to note that Podman doesn't depend on a daemon, and it doesn't require root privileges.

The first part of this tutorial focuses on similarities between Podman and Docker, and we'll show how you can do the following:

  • Move a Docker image to Podman.
  • Create a bare-bones Nuxt.JS project and build a container image for it
  • Push your container image to Quay.io
  • Pull the image from Quay.io and run it with Docker.

In the second part of this tutorial, we'll walk you through two of the most important features that differentiate Podman from Docker. In this section, you will do the following:

  • Create a Pod with Podman
  • Generate a Kubernetes Pod spec with Podman, and deploy it to a Kubernetes cluster.

Prerequisites

1.This tutorial is intended for readers who have prior exposure to Docker. In the next sections, you will use commands such as run, build, push, commit, and tag. It is beyond the scope of this tutorial to explain how these commands work.
2.A running Linux system with Podman and Docker installed.

You can enter the following command to check that Podman is installed on your system:

podman version
Enter fullscreen mode Exit fullscreen mode 
Version:            1.6.4
RemoteAPI Version:  1
Go Version:         go1.12.12
OS/Arch:            linux/amd64
Enter fullscreen mode Exit fullscreen mode

Refer Podman Installation Instructions for details on how to install Podman.

Use the following command to verify if Docker is installed:

docker --version
Enter fullscreen mode Exit fullscreen mode 
Docker version 18.06.3-ce, build d7080c1
Enter fullscreen mode Exit fullscreen mode

See the Get Docker page for details on how to install Docker.

3.Git. To check if Git is installed on your system enter, type the following command:

git version
Enter fullscreen mode Exit fullscreen mode 
git version 2.18.2
Enter fullscreen mode Exit fullscreen mode

You can refer Getting Started - Installing Git on details of installing Git.

4.Node.js 10 or higher. To check if Node.js is installed on your computer, type the following command:

node --version
Enter fullscreen mode Exit fullscreen mode 
v10.16.3
Enter fullscreen mode Exit fullscreen mode

If Node.js is not installed, you can download the installer from the Downloads page.

  • A Kubernetes Cluster. If you don’t have a running Kubernetes cluster, refer the “Create a Kubernetes Cluster with Kind” section.
  • Additionally, you will need a Quay.io account.

Moving Images from Docker to Podman

If you've just installed Podman on a system on which you've already used Docker to pull one or more images, you'll notice that running the podman images command doesn't show your Docker images:

docker images
Enter fullscreen mode Exit fullscreen mode 
REPOSITORY          TAG                 IMAGE ID            CREATED             SIZE
cassandra           latest              b571e0906e1b        10 days ago         324MB
Enter fullscreen mode Exit fullscreen mode 
podman images
Enter fullscreen mode Exit fullscreen mode 
REPOSITORY   TAG   IMAGE ID   CREATED   SIZE
Enter fullscreen mode Exit fullscreen mode

The reason why you don't see your Docker images is that Podman runs without root privileges. Thus, its repository is located in the user's home directory - ~/.local/share/containers. However, Podman can import an image directly from the Docker daemon running on your machine, through the docker-daemon transport.

In this section, you'll use Docker to pull the hello-world image. Then, you'll import it into Podman. Lastly, you'll run the hello-world image with Podman.

1.Download and run the hello-world image by executing the following command:

sudo docker run hello-world
Enter fullscreen mode Exit fullscreen mode 
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
1b930d010525: Pull complete
Digest: sha256:9572f7cdcee8591948c2963463447a53466950b3fc15a247fcad1917ca215a2f
Status: Downloaded newer image for hello-world:latest

Hello from Docker!
This message shows that your installation appears to be working correctly.

To generate this message, Docker took the following steps:
 1. The Docker client contacted the Docker daemon.
 2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
    (amd64)
 3. The Docker daemon created a new container from that image which runs the
    executable that produces the output you are currently reading.
 4. The Docker daemon streamed that output to the Docker client, which sent it
    to your terminal.

To try something more ambitious, you can run an Ubuntu container with:
 $ docker run -it ubuntu bash

Share images, automate workflows, and more with a free Docker ID:
 https://hub.docker.com/

For more examples and ideas, visit:
 https://docs.docker.com/get-started/
Enter fullscreen mode Exit fullscreen mode

2.The following docker images command lists the Docker images on your system and pretty-prints the output:

sudo docker images --format '{{.Repository}}:{{.Tag}}'
Enter fullscreen mode Exit fullscreen mode 
hello-world:latest
Enter fullscreen mode Exit fullscreen mode

3.Enter the podman pull command specifying the transport (docker-daemon) and the name of the image, separated by ::

podman pull docker-daemon:hello-world:latest
Enter fullscreen mode Exit fullscreen mode 
Getting image source signatures
Copying blob af0b15c8625b done
Copying config fce289e99e done
Writing manifest to image destination
Storing signatures
fce289e99eb9bca977dae136fbe2a82b6b7d4c372474c9235adc1741675f587e
Enter fullscreen mode Exit fullscreen mode

4.Once you've imported the image, running the podman images command will display the hello-world image:

podman images
Enter fullscreen mode Exit fullscreen mode 
REPOSITORY                      TAG      IMAGE ID       CREATED         SIZE
docker.io/library/hello-world   latest   fce289e99eb9   13 months ago   5.94 kB
Enter fullscreen mode Exit fullscreen mode

5.To run the image, enter the following podman run command:

podman run hello-world
Enter fullscreen mode Exit fullscreen mode 
Hello from Docker!
This message shows that your installation appears to be working correctly.

To generate this message, Docker took the following steps:
 1. The Docker client contacted the Docker daemon.
 2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
    (amd64)
 3. The Docker daemon created a new container from that image which runs the
    executable that produces the output you are currently reading.
 4. The Docker daemon streamed that output to the Docker client, which sent it
    to your terminal.

To try something more ambitious, you can run an Ubuntu container with:
 $ docker run -it ubuntu bash

Share images, automate workflows, and more with a free Docker ID:
 https://hub.docker.com/

For more examples and ideas, visit:
 https://docs.docker.com/get-started/
Enter fullscreen mode Exit fullscreen mode

Creating a Basic Nuxt.js Project

For the scope of this tutorial, we’ll create a simple web-application using Nuxt.JS, a progressive Vue-based framework that aims to provide a great experience for developers. Then, in the next sections, you'll use Podman to create a container image for your project and push it Quay.io. Lastly, you'll use Docker to run the container image.

1.Nuxt.JS is distributed as an NPM package. To install it, fire up a terminal window, and execute the following command:

npm install nuxt
Enter fullscreen mode Exit fullscreen mode 
+ nuxt@2.11.0
added 1067 packages from 490 contributors and audited 9750 packages in 75.666s
found 0 vulnerabilities
Enter fullscreen mode Exit fullscreen mode

Note that the above output was truncated for brevity.

2.With Nuxt.JS installed on your computer, you can create a new bare-bones project:

npx create-nuxt-app podman-nuxtjs-demo
Enter fullscreen mode Exit fullscreen mode

You will be prompted to answer a few questions:

create-nuxt-app v2.14.0
✨  Generating Nuxt.js project in podman-nuxtjs-demo
? Project name podman-nuxtjs-demo
? Project description Podman Nuxt.JS demo
? Author name Appfleet
? Choose the package manager Npm
? Choose UI framework Bootstrap Vue
? Choose custom server framework None (Recommended)
? Choose Nuxt.js modules (Press <space> to select, <a> to toggle all, <i> to invert selectio
n)
? Choose linting tools ESLint
? Choose test framework None
? Choose rendering mode Universal (SSR)
? Choose development tools jsconfig.json (Recommended for VS Code)
Enter fullscreen mode Exit fullscreen mode

Once you answer these questions, npm will install the required dependencies:

🎉  Successfully created project podman-nuxtjs-demo

  To get started:

    cd podman-nuxtjs-demo
    npm run dev

  To build & start for production:

    cd podman-nuxtjs-demo
    npm run build
    npm run start
Enter fullscreen mode Exit fullscreen mode

Note that the above output was truncated for brevity.

3.Enter the following commands to start your new application:

cd podman-nuxtjs-demo/ && npm run dev
Enter fullscreen mode Exit fullscreen mode 
> podman-nuxtjs-demo@1.0.0 dev /home/vagrant/podman-nuxtjs-demo
> nuxt


   ╭─────────────────────────────────────────────╮
   │                                             │
   │   Nuxt.js v2.11.0                           │
   │   Running in development mode (universal)   │
   │                                             │
   │   Listening on: http://localhost:3000/      │
   │                                             │
   ╰─────────────────────────────────────────────╯

ℹ Preparing project for development                                               14:39:30
ℹ Initial build may take a while                                                  14:39:30
✔ Builder initialized                                                             14:39:30
✔ Nuxt files generated                                                            14:39:30

✔ Client
  Compiled successfully in 23.53s

✔ Server
  Compiled successfully in 17.82s

ℹ Waiting for file changes                                                        14:39:56
ℹ Memory usage: 209 MB (RSS: 346 MB)                                              14:39:56
Enter fullscreen mode Exit fullscreen mode

4.Point your browser to http://localhost:3000, and you should see something similar to the screenshot below:

Alt Text

Building a Container Image for Your Nuxt.JS Project

In this section, we'll look at how you can use Podman to build a container image for the podman-nextjs-demo project.

1.Create a file called Dockerfile and place the following content into it:

FROM node:10
WORKDIR /usr/src/app
COPY package*.json ./
RUN npm install
COPY . .
EXPOSE 3000
CMD [ "npm", "run", "dev" ]
Enter fullscreen mode Exit fullscreen mode

☞ For a quick refresher on the above Dockerfile commands, refer the Create a Docker Image section from the Debug a Node.js Application Running in a Docker Container tutorial.

2.To avoid sending large files to the build context and speed up the process, create a file called .dockerignore with the following content:

node_modules
npm-debug.log
.nuxt
Enter fullscreen mode Exit fullscreen mode

As you can see, this is just a plain-text file containing names of the files and directories that Podman should exclude from the build.

3.Build the image. Execute the following podman build command, specifying the -t flag with the tagged name Podman will apply to the build image:

podman build -t podman-nuxtjs-demo:podman .
Enter fullscreen mode Exit fullscreen mode 
STEP 1: FROM node:10
STEP 2: RUN mkdir -p /usr/src/nuxt-app
--> Using cache c7198c4f08b90ecb5575bbce23fc095e5c65fe5dc4b4f77b23192e2eae094d6f
STEP 3: WORKDIR /usr/src/nuxt-app
--> Using cache f1cc5aba3f36e122513c5ff0410f862d6099bcee886453f7fb30859f66e0ac78
STEP 4: COPY . /usr/src/nuxt-app/
--> Using cache fb4c322c98b41d446f5cceb88b3f9c451751d0cfe8ed9d0e6eb153919b498da3
STEP 5: RUN npm install
--> Using cache bb5324e79782b4522048dcc5f0f02c41b56e12198438aa59a7588a6824a435e1
STEP 6: RUN npm run build

> podman-nuxtjs-demo@1.0.0 build /usr/src/nuxt-app
> nuxt build

ℹ Production build
✔ Builder initialized
✔ Nuxt files generated

✔ Client
  Compiled successfully in 2.95m

✔ Server
  Compiled successfully in 10.91s


Hash: 7c4493c4d1c7b235dd8e
Version: webpack 4.41.6
Time: 177257ms
Built at: 02/11/2020 4:48:17 PM
                         Asset      Size  Chunks                                Chunk Names
../server/client.manifest.json  16.1 KiB          [emitted]
       7d497fe85470995d6e29.js  2.99 KiB       2  [emitted] [immutable]         pages/index
       848739217655a36af267.js   671 KiB       4  [emitted] [immutable]  [big]  vendors.app
       90036491716edfc3e86d.js   159 KiB       1  [emitted] [immutable]         commons.app
                      LICENSES  1.95 KiB          [emitted]
       b625f5fc00e8ff962762.js  2.31 KiB       3  [emitted] [immutable]         runtime
       eac7116f7d28455b0958.js    36 KiB       0  [emitted] [immutable]         app
 + 2 hidden assets
Entrypoint app = b625f5fc00e8ff962762.js 90036491716edfc3e86d.js 848739217655a36af267.js eac7116f7d28455b0958.js

WARNING in asset size limit: The following asset(s) exceed the recommended size limit (244 KiB).
This can impact web performance.
Assets:
  848739217655a36af267.js (671 KiB)

Hash: e3d9cfd644a086dc9c5b
Version: webpack 4.41.6
Time: 10916ms
Built at: 02/11/2020 4:48:29 PM
                  Asset       Size  Chunks                         Chunk Names
d1d703b09adf296a453d.js   3.07 KiB       1  [emitted] [immutable]  pages/index
              server.js    222 KiB       0  [emitted]              app
   server.manifest.json  145 bytes          [emitted]
Entrypoint app = server.js
0d239b0083a60482b4b5fa60a99b96dd22045822e50fbd83b8a369d8179bf307
STEP 7: EXPOSE 3000
1d037e041dd4a8d6c94a9f6fb8fe6578f5e00d27aab9168bad83e7ab260bbeae
STEP 8: ENV NUXT_HOST=0.0.0.0
40d684a5441a8da38ed5198be722719f393be13a855a9e85cbc49e5c7155f7cc
STEP 9: ENV NUXT_PORT=3000
7d07961e058d66e172f4b9e01d50fb355c16060a990252c5bc7cd35d960f5f72
STEP 10: CMD ["npm", "run", "dev"]
STEP 11: COMMIT podman-nuxtjs-demo:podman
54c55a8a44f30105371652bc2c25e0fbba200ad6c945654077151194aa0a66fe
Enter fullscreen mode Exit fullscreen mode

4.At this point, you can check that everything went well with:

podman images
Enter fullscreen mode Exit fullscreen mode 
REPOSITORY                     TAG      IMAGE ID       CREATED              SIZE
localhost/podman-nuxtjs-demo   podman   54c55a8a44f3   About a minute ago   1.09 GB
docker.io/library/node         10       bb78c02ca3bf   4 days ago           937 MB
Enter fullscreen mode Exit fullscreen mode

5.To run the podman-nuxtjs-demo:podman container, enter the podman run command and pass it the following arguments:

  • -dt to specify that the container should be run in the background and that Podman should allocate a pseudo-TTY
  • -p with the port on the host (3000) that’ll be forwarded to the container port (3000), separated by :.
  • The name of your image (podman-nuxtjs-demo:podman) 
podman run -dt -p 3000:3000/tcp podman-nuxtjs-demo:podman
Enter fullscreen mode Exit fullscreen mode

This will print out to the console the container ID:

4de08084dd1d33fcdae96cd493b3eb20406ea89ce2a3e8dbc833b38c2243ce43
Enter fullscreen mode Exit fullscreen mode

6.You can list your running containers with:

podman ps
Enter fullscreen mode Exit fullscreen mode 
CONTAINER ID  IMAGE                                COMMAND      CREATED        STATUS            PORTS                   NAMES
4de08084dd1d  localhost/podman-nuxtjs-demo:podman  npm run dev  4 seconds ago  Up 4 seconds ago  0.0.0.0:3000->3000/tcp  objective_neumann
Enter fullscreen mode Exit fullscreen mode

7.To retrieve detailed information about your running container, enter the podman inspect command specifying the container ID:

podman inspect 4de08084dd1d33fcdae96cd493b3eb20406ea89ce2a3e8dbc833b38c2243ce43
Enter fullscreen mode Exit fullscreen mode 
podman inspect 4de08084dd1d33fcdae96cd493b3eb20406ea89ce2a3e8dbc833b38c2243ce43
[
    {
        "Id": "4de08084dd1d33fcdae96cd493b3eb20406ea89ce2a3e8dbc833b38c2243ce43",
        "Created": "2020-02-11T17:00:06.819669549Z",
        "Path": "docker-entrypoint.sh",
        "Args": [
            "npm",
            "run",
            "dev"
        ],
        "State": {
            "OciVersion": "1.0.1-dev",
            "Status": "running",
            "Running": true,
            "Paused": false,
            "Restarting": false,
            "OOMKilled": false,
            "Dead": false,
            "Pid": 10637,
            "ConmonPid": 10628,
            "ExitCode": 0,
            "Error": "",
            "StartedAt": "2020-02-11T17:00:07.317812139Z",
            "FinishedAt": "0001-01-01T00:00:00Z",
            "Healthcheck": {
                "Status": "",
                "FailingStreak": 0,
                "Log": null
            }
        },
        "Image": "54c55a8a44f30105371652bc2c25e0fbba200ad6c945654077151194aa0a66fe",
        "ImageName": "localhost/podman-nuxtjs-demo:podman",
        "Rootfs": "",
        "Pod": "",
Enter fullscreen mode Exit fullscreen mode

Note that the above output was truncated for brevity.

8.To retrieve the logs from your container, run the podman logs command specifying the container ID or the --latest flag:

podman logs --latest
Enter fullscreen mode Exit fullscreen mode 
> podman-nuxtjs-demo@1.0.0 dev /usr/src/nuxt-app
> nuxt


   ╭─────────────────────────────────────────────╮
   │                                             │
   │   Nuxt.js v2.11.0                           │
   │   Running in development mode (universal)   │
   │                                             │
   │   Listening on: http://10.0.2.100:3000/     │
   │                                             │
   ╰─────────────────────────────────────────────╯

ℹ Preparing project for development
ℹ Initial build may take a while
✔ Builder initialized
✔ Nuxt files generated

✔ Client
  Compiled successfully in 25.36s

✔ Server
  Compiled successfully in 19.21s

ℹ Waiting for file changes
ℹ Memory usage: 254 MB (RSS: 342 MB)
Enter fullscreen mode Exit fullscreen mode

9.Display the list of running processes inside your container:

podman top 4de08084dd1d
Enter fullscreen mode Exit fullscreen mode 
USER   PID   PPID   %CPU     ELAPSED           TTY     TIME   COMMAND
root   1     0      0.000    3m52.098907307s   pts/0   0s     npm
root   17    1      0.000    3m51.099829437s   pts/0   0s     sh -c nuxt
root   18    17     11.683   3m51.099997015s   pts/0   27s    node /usr/src/nuxt-app/node_modules/.bin/nuxt
Enter fullscreen mode Exit fullscreen mode

Push Your Podman Image to Quay.io

1.First, you must generate an encrypted password. Point your browser to http://quay.io, and then navigate to the Account Settings page:

Alt Text

2.On the Account Settings page, select Generate Encrypted Password:

Alt Text

3.When prompted, enter your Quay.io password:

Alt Text

4.From the sidebar on the left, select Docker Login. Then, copy your encrypted password:

Alt Text

5.You can now log in to Quay.io. Enter the podman login command specifying:

  • The registry server (quay.io)
  • The -u flag with your username
  • The -p flag with the encrypted password you retrieved earlier 
podman login quay.io -u <YOUR_USER_NAME> -p="<YOUR_ENCRYPTED_PASSWORD>"
Enter fullscreen mode Exit fullscreen mode 
Login Succeeded!
Enter fullscreen mode Exit fullscreen mode

6.To push the podman-nuxtjs-demo image to Quay.io, enter the following podman push command:

podman push podman-nuxtjs-demo:podman quay.io/andreipope/podman-nuxtjs-demo:podman
Enter fullscreen mode Exit fullscreen mode 
Getting image source signatures
Copying blob 69dfa7bd7a92 done
Copying blob 4d1ab3827f6b done
Copying blob 7948c3e5790c done
Copying blob 01727b1a72df done
Copying blob 03dc1830d2d5 done
Copying blob 1d7382716a27 done
Copying blob 062fc3317d1a done
Copying blob 3d36b8a4efb1 done
Copying blob 1708ebc408a9 done
Copying blob 0aacf878561f done
Copying blob c49b91e9cfd0 done
Copying blob 4294ef3571b7 done
Copying blob 1da55789948c done
Copying config 54c55a8a44 done
Writing manifest to image destination
Copying config 54c55a8a44 done
Writing manifest to image destination
Storing signatures
Enter fullscreen mode Exit fullscreen mode

In the above command, do not forget to replace our username (andreipope) with yours

7.Point your browser to https://quay.io/, navigate to the podman-nuxtjs-demo repository, and make sure the repository is public:

Alt Text

Run Your Podman Image with Docker

Container images are compatible between Podman and Docker. In this section, you'll use Docker to pull the podman-nuxtjs-demo image from Quay.io and run it. Ideally, you would want to run this on a different machine.

1.You can log in to Quay.io by entering the docker login command and passing it the following parameters:

  • The -u flag with your username
  • The -p flag with your encrypted password (you retrieved it from Quay.io in the previous section)
  • The name of the registry (quay.io) 
docker login -u="<YOUR_USER_NAME>" -p="YOUR_ENCRYPTED_PASSWORD" quay.io
Enter fullscreen mode Exit fullscreen mode 
WARNING! Using --password via the CLI is insecure. Use --password-stdin.
Login Succeeded
Enter fullscreen mode Exit fullscreen mode

2.To run the podman-nuxtjs-demo image, you can use the following command:

docker run -dt -p 3000:3000/tcp  quay.io/andreipope/podman-nuxtjs-demo:podman
Enter fullscreen mode Exit fullscreen mode 
Unable to find image 'quay.io/andreipope/podman-nuxtjs-demo:podman' locally
podman: Pulling from andreipope/podman-nuxtjs-demo
03644a8453bd: Pull complete
e2c9fbbb35b2: Pull complete
0c33fe27c91c: Pull complete
957ac2567af6: Pull complete
934d2e09d84d: Pull complete
50c60e376f59: Pull complete
3c43a52a3ecc: Pull complete
e74942a3267a: Pull complete
af1466e8bc5b: Pull complete
3f24948a552e: Pull complete
df2fea35a007: Pull complete
7045f2526057: Pull complete
5090c2f6d806: Pull complete
Digest: sha256:fcf90cfc3fe1d0f7e975db8a271003cdd51d6f177e490eb39ec1e44d3659b815
Status: Downloaded newer image for quay.io/andreipope/podman-nuxtjs-demo:podman
1c0981690d66f2cd8cb77e9573f1dd4e9d7700869e08797b42fc33590d8baabf
Enter fullscreen mode Exit fullscreen mode

3.Wait a bit until Docker pulls the image and creates the container. Then, issue the the docker ps command to display the list of running containers:

docker ps
Enter fullscreen mode Exit fullscreen mode 
CONTAINER ID        IMAGE                                          COMMAND                  CREATED             STATUS              PORTS                    NAMES
1c0981690d66        quay.io/andreipope/podman-nuxtjs-demo:podman   "docker-entrypoint.s…"   25 seconds ago      Up 20 seconds       0.0.0.0:3000->3000/tcp   practical_bose
Enter fullscreen mode Exit fullscreen mode

4.To make sure everything works as expected, point your browser to http://localhost:3000. You should see something similar to the screenshot below:

Alt Text

Creating Pods

Until now, you've used Podman similarly to how Docker is used. However, Podman brings a couple of new features such as the ability to create pods. A Pod is a group of tightly-coupled containers that share their storage and network resources. In a nutshell, you can use a Pod to model a logical host. In this section, we'll walk you through the process of creating a Pod comprised of the podman-nuxtjs-demo container and a PostgreSQL database. Note that it is beyond the scope of this tutorial to show how you can configure the storage and network for your Pod.

1.Create a pod with the podman-nuxtjs-demo container. Enter the podman run with the following arguments:

  • -dt to specify that the container should be run in the background and that Podman should allocate a pseudo-TTY
  • --pod with the name of your new Pod. Specifying -newindicates that you want to create a new Pod. Otherwise, Podman tries to attach the container to an existing Pod.
  • -p with the port on host (3000) that’ll be forwarded to the container port (3000), separated by :.
  • The name of your image (podman-nuxtjs-demo:podman) 
podman run -dt --pod new:podman_demo -p 3000:3000/tcp quay.io/andreipope/podman-nuxtjs-demo:podman
Enter fullscreen mode Exit fullscreen mode

This will print the identifier of your new Pod:

972c7c1db0c31a42ba4b41025078dfc6abb046f503aa413d6cca313068042041
Enter fullscreen mode Exit fullscreen mode

2.You can display the list of running Pods with the podman pod list command:

podman pod list
Enter fullscreen mode Exit fullscreen mode 
POD ID         NAME             STATUS    CREATED          # OF CONTAINERS   INFRA ID
d15a2abd9d5b   podman_demo      Running   32 seconds ago   2                 6a5bc0360ae2
Enter fullscreen mode Exit fullscreen mode

In the output above, the number of containers is 2. This is because all Podman Pods include something called an Infra container, which does nothing except that it goes to sleep. This way, it holds the namespace associated with the Pod so that Podman can attach other containers to the Pod.

3.Print the list of running containers by entering the podman ps command followed by the -a and -p flags. This lists all containers and prints the identifiers and the names of the Pods your containers are associated with:

podman ps -ap
Enter fullscreen mode Exit fullscreen mode 
CONTAINER ID  IMAGE                                         COMMAND      CREATED            STATUS                         PORTS                   NAMES                POD
972c7c1db0c3  quay.io/andreipope/podman-nuxtjs-demo:podman  npm run dev  56 seconds ago     Up 55 seconds ago              0.0.0.0:3000->3000/tcp  festive_yonath       d15a2abd9d5b
6a5bc0360ae2  k8s.gcr.io/pause:3.1                                       56 seconds ago     Up 55 seconds ago              0.0.0.0:3000->3000/tcp  d15a2abd9d5b-infra   d15a2abd9d5b
Enter fullscreen mode Exit fullscreen mode

As you can see, the Infra container uses the k8s.gcr.io/pause image.

4.Run the postgres:11-alpine image and associate it with the podman_demo Pod:

podman run -dt --pod podman_demo postgres:11-alpine
d395bed40988a953257b9501497c66b886b2fb6e81f48aa0ac89d7cfe2639b75
Enter fullscreen mode Exit fullscreen mode

5.This takes a bit of time to complete. Once everything is ready, you should see that the number of containers has been increased to 3:

podman pod list
Enter fullscreen mode Exit fullscreen mode 
POD ID         NAME             STATUS    CREATED          # OF CONTAINERS   INFRA ID
d15a2abd9d5b   podman_demo      Running   8 minutes ago    3                 6a5bc0360ae2
Enter fullscreen mode Exit fullscreen mode

6.You can display the list of your running containers with the following podman ps command:

podman ps -ap
Enter fullscreen mode Exit fullscreen mode 
CONTAINER ID  IMAGE                                         COMMAND      CREATED            STATUS                        PORTS                   NAMES                POD
ab5bd4810494  docker.io/library/postgres:11-alpine          postgres     5 minutes ago      Up 3 minutes ago              0.0.0.0:3000->3000/tcp  dreamy_jackson       d15a2abd9d5b
972c7c1db0c3  quay.io/andreipope/podman-nuxtjs-demo:podman  npm run dev  9 minutes ago      Up 9 minutes ago              0.0.0.0:3000->3000/tcp  festive_yonath       d15a2abd9d5b
6a5bc0360ae2  k8s.gcr.io/pause:3.1                                       9 minutes ago      Up 9 minutes ago
Enter fullscreen mode Exit fullscreen mode

7.As an example, you can stop the podman-nuxtjs-demo container. The other containers in the Pod won't be affected, and the status of the Pod will show as Running:

podman stop 972c7c1db0c3
Enter fullscreen mode Exit fullscreen mode 
972c7c1db0c31a42ba4b41025078dfc6abb046f503aa413d6cca313068042041
Enter fullscreen mode Exit fullscreen mode 
podman pod ps
Enter fullscreen mode Exit fullscreen mode 
POD ID         NAME             STATUS    CREATED          # OF CONTAINERS   INFRA ID
d15a2abd9d5b   podman_demo      Running   12 minutes ago   3                 6a5bc0360ae2
Enter fullscreen mode Exit fullscreen mode

8.To start again the container, enter the podman start command followed by the identifier of the container you want to start:

podman start 972c7c1db0c3
Enter fullscreen mode Exit fullscreen mode 
972c7c1db0c31a42ba4b41025078dfc6abb046f503aa413d6cca313068042041
Enter fullscreen mode Exit fullscreen mode

9.At this point, if you run the podman ps -ap command, you should see that the status of the podman-nuxtjs-demo container is now Up:

podman ps -ap
CONTAINER ID  IMAGE                                         COMMAND      CREATED            STATUS                        PORTS                   NAMES                POD
ab5bd4810494  docker.io/library/postgres:11-alpine          postgres     7 minutes ago      Up 5 minutes ago             0.0.0.0:3000->3000/tcp  dreamy_jackson       d15a2abd9d5b
972c7c1db0c3  quay.io/andreipope/podman-nuxtjs-demo:podman  npm run dev  14 minutes ago     Up 54 seconds ago             0.0.0.0:3000->3000/tcp  festive_yonath       d15a2abd9d5b
6a5bc0360ae2  k8s.gcr.io/pause:3.1                                       14 minutes ago     Up 14 minutes ago             0.0.0.0:3000->3000/tcp  d15a2abd9d5b-infra   d15a2abd9d5b
Enter fullscreen mode Exit fullscreen mode

10.Lastly, let's top the podman_demo pod:

podman pod stop podman_demo
Enter fullscreen mode Exit fullscreen mode 
d15a2abd9d5bcb6f403515c0ed4dd4cb7df252a87591a88975b5573eb7f20900
Enter fullscreen mode Exit fullscreen mode

11.Enter the following command to make sure your Pod is stopped:

podman pod ps
Enter fullscreen mode Exit fullscreen mode 
POD ID         NAME             STATUS    CREATED          # OF CONTAINERS   INFRA ID
d15a2abd9d5b   podman_demo      Stopped   17 minutes ago   3                 6a5bc0360ae2
Enter fullscreen mode Exit fullscreen mode

Generate a Kubernetes Pod Spec with Podman

Podman can perform a snapshot of your container/Pod and generate a Kubernetes spec. This way, it makes it easier for you to orchestrate your containers with Kubernetes. For the scope of this section, we'll illustrate how to use Podman to generate a Kubernetes spec and deploy your Pod to Kubernetes.

1.To create a Kubernetes spec for a container and save it into a file called podman-nuxtjs-demo.yaml, run the following podman generate kube command:

podman generate kube <CONTAINER_ID> > podman-nuxtjs-demo.yaml
Enter fullscreen mode Exit fullscreen mode

2.Let's take a look at what's inside the podman-nuxtjs-demo.yaml file:

cat podman-nuxtjs-demo.yaml
Enter fullscreen mode Exit fullscreen mode 
# Generation of Kubernetes YAML is still under development!
#
# Save the output of this file and use kubectl create -f to import
# it into Kubernetes.
#
# Created with podman-1.6.4


'''YAML
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: "2020-02-12T05:21:44Z"
  labels:
    app: objectiveneumann
  name: objectiveneumann
spec:
  containers:
  - command:
    - npm
    - run
    - dev
    env:
    - name: PATH
      value: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
    - name: TERM
      value: xterm
    - name: HOSTNAME
    - name: container
      value: podman
    - name: NODE_VERSION
      value: 10.19.0
    - name: YARN_VERSION
      value: 1.21.1
    - name: NUXT_HOST
      value: 0.0.0.0
    - name: NUXT_PORT
      value: "3000"
    image: localhost/podman-nuxtjs-demo:podman
    name: objectiveneumann
    ports:
    - containerPort: 3000
      hostPort: 3000
      protocol: TCP
    resources: {}
    securityContext:
      allowPrivilegeEscalation: true
      capabilities: {}
      privileged: false
      readOnlyRootFilesystem: false
    tty: true
    workingDir: /usr/src/nuxt-app
status: {}
Enter fullscreen mode Exit fullscreen mode

There is a lot of output here, but the parts we're interested in are:

  • metadata.labels.app and metadata.name. You'll have to give them more meaningful names
  • spec.containers.image. Since in real life you'll have to pull the images from a registry, you must replace localhost/podman-nuxtjs-demo:podman with the address of your Quay.io container image.

3.Edit the content of the podman-nuxtjs-demo.yaml file to the following:

# Generation of Kubernetes YAML is still under development!
#
# Save the output of this file and use kubectl create -f to import
# it into Kubernetes.
#
# Created with podman-1.6.4
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: "2020-02-12T05:24:44Z"
  labels:
    app: podman-nuxtjs-demo
  name: podman-nuxtjs-demo
spec:
  containers:
  - command:
    - npm
    - run
    - dev
    env:
    - name: PATH
      value: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
    - name: TERM
      value: xterm
    - name: HOSTNAME
    - name: container
      value: podman
    - name: NODE_VERSION
      value: 10.19.0
    - name: YARN_VERSION
      value: 1.21.1
    - name: NUXT_HOST
      value: 0.0.0.0
    - name: NUXT_PORT
      value: "3000"
    image: quay.io/andreipope/podman-nuxtjs-demo:podman
    name: objectiveneumann
    ports:
    - containerPort: 3000
      hostPort: 3000
      protocol: TCP
    resources: {}
    securityContext:
      allowPrivilegeEscalation: true
      capabilities: {}
      privileged: false
      readOnlyRootFilesystem: false
    tty: true
    workingDir: /usr/src/nuxt-app
status: {}
Enter fullscreen mode Exit fullscreen mode

The above spec uses the address of our container image - quay.io/andreipope/podman-nuxtjs-demo:podman. Make sure you replace this with your address.

4.Now, if your Quay.io repository is private, Kubernetes must authenticate with the registry to pull the image. Point your browser to http://quay.io, and then navigate to the Settings section of your repository. Select Generate Encrypted Password, and you'll be asked to type your password. From the sidebar on the left, select Kubernetes Secret to download your Kubernetes secrets file:

Alt Text

5.Next, you must refer to this Kubernetes secret from the podman-nuxtjs-demo.yaml. You can do this by adding a field similar to the one below:

imagePullSecrets:
    - name: andreipope-pull-secret
Enter fullscreen mode Exit fullscreen mode

Note that the name of our Kubernetes secret is andreipope-pull-secret, but yours will be different.

At this point, your podman-nuxtjs-demo.yaml file should look something like the following:

# Generation of Kubernetes YAML is still under development!
#
# Save the output of this file and use kubectl create -f to import
# it into Kubernetes.
#
# Created with podman-1.6.4
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: "2020-02-12T05:24:44Z"
  labels:
    app: podman-nuxtjs-demo
  name: podman-nuxtjs-demo
spec:
  containers:
  - command:
    - npm
    - run
    - dev
    env:
    - name: PATH
      value: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
    - name: TERM
      value: xterm
    - name: HOSTNAME
    - name: container
      value: podman
    - name: NODE_VERSION
      value: 10.19.0
    - name: YARN_VERSION
      value: 1.21.1
    - name: NUXT_HOST
      value: 0.0.0.0
    - name: NUXT_PORT
      value: "3000"
    image: quay.io/andreipope/podman-nuxtjs-demo:podman
    name: objectiveneumann
    ports:
    - containerPort: 3000
      hostPort: 3000
      protocol: TCP
    resources: {}
    securityContext:
      allowPrivilegeEscalation: true
      capabilities: {}
      privileged: false
      readOnlyRootFilesystem: false
    tty: true
    workingDir: /usr/src/nuxt-app
  imagePullSecrets:
    - name: andreipope-pull-secret
status: {}
Enter fullscreen mode Exit fullscreen mode

Create a Kubernetes Cluster with Kind (Optional)

Kind is a tool for running local Kubernetes clusters using Docker container "nodes". Follow the steps in this section if you don't have a running Kubernetes cluster:

1.Create a file called cluster.yaml with the following content:

kind create cluster --config cluster.yaml
Enter fullscreen mode Exit fullscreen mode 
# three node (two workers) cluster config
kind: Cluster
apiVersion: kind.x-k8s.io/v1alpha4
nodes:
- role: control-plane
- role: worker
- role: worker
Enter fullscreen mode Exit fullscreen mode

2.Apply the spec:

kind create cluster --config cluster.yaml
Enter fullscreen mode Exit fullscreen mode 
Creating cluster "kind" ...
 ✓ Ensuring node image (kindest/node:v1.16.3) 🖼
 ✓ Preparing nodes 📦
 ✓ Writing configuration 📜
 ✓ Starting control-plane 🕹️
 ✓ Installing CNI 🔌
 ✓ Installing StorageClass 💾
 ✓ Joining worker nodes 🚜
Set kubectl context to "kind-kind"
You can now use your cluster with:
Enter fullscreen mode Exit fullscreen mode

This creates a Kubernetes cluster with a control plane and two worker nodes.

Deploying to Kubernetes

1.Apply your Kubernetes pull secrets spec. Enter the kubectl create command specifying:

  • The -f flag with the name of the file (our example uses a file named andreipope-secret.yml)
  • The --namespace flag with the name of your namespace (we're using the default namespace) 
kubectl create -f andreipope-secret.yml --namespace=default
Enter fullscreen mode Exit fullscreen mode 
secret/andreipope-pull-secret created
Enter fullscreen mode Exit fullscreen mode

2.Now you're ready to apply the podman-nuxt-js-demo spec:

kubectl apply -f podman-nuxt-js-demo.yaml
Enter fullscreen mode Exit fullscreen mode 
pod/podman-nuxtjs-demo created
Enter fullscreen mode Exit fullscreen mode

3.Monitor the status of your installation with:

kubectl get pods
Enter fullscreen mode Exit fullscreen mode 
NAME               READY   STATUS              RESTARTS   AGE
podman-nuxtjs-demo   0/1     ContainerCreating   0          85s
Enter fullscreen mode Exit fullscreen mode

4.You can retrieve more details about the status of your installation by entering the kubectl describe pod followed by the name of your Pod:

kubectl describe pod  podman-nuxtjs-demo
Enter fullscreen mode Exit fullscreen mode 
Name:         podman-nuxtjs-demo
Namespace:    default
Priority:     0
Node:         kind-worker2/172.17.0.3
Start Time:   Wed, 12 Feb 2020 19:36:37 +0200
Labels:       app=podman-nuxtjs-demo
Annotations:  kubectl.kubernetes.io/last-applied-configuration:
                {"apiVersion":"v1","kind":"Pod","metadata":{"annotations":{},"creationTimestamp":"2020-02-12T05:24:44Z","labels":{"app":"podman-nuxtjs-dem...
Status:       Pending
IP:
IPs:          <none>
Containers:
  objectiveneumann:
    Container ID:
    Image:         quay.io/andreipope/podman-nuxtjs-demo:podman
    Image ID:
    Port:          3000/TCP
    Host Port:     3000/TCP
    Command:
      npm
      run
      dev
    State:          Waiting
      Reason:       ContainerCreating
    Ready:          False
    Restart Count:  0
    Requests:
      memory:  1Gi
    Environment:
      PATH:          /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
      TERM:          xterm
      HOSTNAME:
      container:     podman
      NODE_VERSION:  10.19.0
      YARN_VERSION:  1.21.1
      NUXT_HOST:     0.0.0.0
      NUXT_PORT:     3000
    Mounts:
      /var/run/secrets/kubernetes.io/serviceaccount from default-token-rp6n5 (ro)
Conditions:
  Type              Status
  Initialized       True
  Ready             False
  ContainersReady   False
  PodScheduled      True
Volumes:
  default-token-rp6n5:
    Type:        Secret (a volume populated by a Secret)
    SecretName:  default-token-rp6n5
    Optional:    false
QoS Class:       Burstable
Node-Selectors:  <none>
Tolerations:     node.kubernetes.io/not-ready:NoExecute for 300s
                 node.kubernetes.io/unreachable:NoExecute for 300s
Events:
  Type    Reason     Age   From                   Message
  ----    ------     ----  ----                   -------
  Normal  Scheduled  57s   default-scheduler      Successfully assigned default/podman-nuxtjs-demo to kind-worker2
  Normal  Pulling    55s   kubelet, kind-worker2  Pulling image "quay.io/andreipope/podman-nuxtjs-demo:podman"
Enter fullscreen mode Exit fullscreen mode

As an alternative, you can list events with the following command:

kubectl get events
Enter fullscreen mode Exit fullscreen mode 
LAST SEEN   TYPE     REASON                    OBJECT                    MESSAGE
4m55s       Normal   RegisteredNode            node/kind-control-plane   Node kind-control-plane event: Registered Node kind-control-plane in Controller
4m37s       Normal   Starting                  node/kind-control-plane   Starting kube-proxy.
4m36s       Normal   NodeHasSufficientMemory   node/kind-worker          Node kind-worker status is now: NodeHasSufficientMemory
4m36s       Normal   NodeHasNoDiskPressure     node/kind-worker          Node kind-worker status is now: NodeHasNoDiskPressure
4m36s       Normal   NodeHasSufficientPID      node/kind-worker          Node kind-worker status is now: NodeHasSufficientPID
4m35s       Normal   RegisteredNode            node/kind-worker          Node kind-worker event: Registered Node kind-worker in Controller
4m15s       Normal   Starting                  node/kind-worker          Starting kube-proxy.
3m36s       Normal   NodeReady                 node/kind-worker          Node kind-worker status is now: NodeReady
4m34s       Normal   NodeHasSufficientMemory   node/kind-worker2         Node kind-worker2 status is now: NodeHasSufficientMemory
4m34s       Normal   NodeHasNoDiskPressure     node/kind-worker2         Node kind-worker2 status is now: NodeHasNoDiskPressure
4m34s       Normal   NodeHasSufficientPID      node/kind-worker2         Node kind-worker2 status is now: NodeHasSufficientPID
4m30s       Normal   RegisteredNode            node/kind-worker2         Node kind-worker2 event: Registered Node kind-worker2 in Controller
4m15s       Normal   Starting                  node/kind-worker2         Starting kube-proxy.
3m34s       Normal   NodeReady                 node/kind-worker2         Node kind-worker2 status is now: NodeReady
3m29s       Normal   Scheduled                 pod/podman-nuxtjs-demo    Successfully assigned default/podman-nuxtjs-demo to kind-worker2
3m27s       Normal   Pulling                   pod/podman-nuxtjs-demo    Pulling image "quay.io/andreipope/podman-nuxtjs-demo:podman"
Enter fullscreen mode Exit fullscreen mode

5.Wait a bit until the pod is created. Then, you can list all pods with:

kubectl get pods
Enter fullscreen mode Exit fullscreen mode 
NAME                 READY   STATUS    RESTARTS   AGE
podman-nuxtjs-demo   1/1     Running   0          7m34s
Enter fullscreen mode Exit fullscreen mode

6.Now let's forward all requests made to http://localhost:3000 to port 3000 on the podman-nuxtjs-demo Pod:

kubectl port-forward pod/podman-nuxtjs-demo 3000:3000
Enter fullscreen mode Exit fullscreen mode 
Forwarding from 127.0.0.1:3000 -> 3000
Forwarding from [::1]:3000 -> 3000
Handling connection for 3000
Handling connection for 3000
Handling connection for 3000
Handling connection for 3000
Handling connection for 3000
Handling connection for 3000
Handling connection for 3000
Enter fullscreen mode Exit fullscreen mode

7.Point your browser to http://localhost:3000. If everything works well, you should see something like the following:

Alt Text

Congratulations on completing this tutorial, now you know enough to use Podman as a replacement for Docker.

Top comments (0)

Read next

sukkergris profile image

Run devcontainers as a non-root user

Theodor Heiselberg -

code42cate profile image

Day 9: Docker Environment Variables and Configuration

Jonas Scholz -

danial profile image

Navigating Amazon Web Services: A Guide to Getting Help through Email

Danial Ranjha -

danielsogl profile image

Flexible Angular Builds: A Guide to Angular 19 Build-Time Variables with Docker

Daniel Sogl -