DEV Community

What concepts do junior devs get stuck on where they usually need guidance to get past the problem?

Ben Halpern on January 15, 2024

Collapse
 
ben profile image
Ben Halpern

I'll start with the thought I had which sparked this question:

I find junior devs often need guidance to help them understand that the abstraction they are comfortable with is, in fact, "just" an abstraction and is often shallower than they realize.

For example, in Ruby I usually pull in the HTTParty gem because the language's default support for HTTP request is kind of ugly and painful. However I find that more junior devs will come into a project with HTTParty and effectively think this is the only way to make an HTTP request unless guided otherwise.

I think this applies pretty generally: The library you got comfortable with becomes your idea of how things just are done in general and this is how to do it. This might afflict self-taught/bootcamp devs more than people with CS backgrounds.

This is just an observation of mine, what are some other ideas?

Collapse
 
dylanlacey profile image
Dylan Lacey

I'm a professional Explainer-Of-Things-To-Other-Developers (Dev Advocate/Support) and I can't agree more.

I remember a Ruby talk at RailsConf several years ago where an audience member asked "Will this work in Rails, as well as in Ruby?".

The speaker was completely confused until it dawned on them that the person asking didn't realize that Rails is "just" Ruby. The questioner's abstraction went Rails-deep. That person might have been excellent at Rails! It just hadn't occurred to them to peel back the layers and see what's underneath.

The best way I've found around this is to encourage Juniors to read the libraries they're using, add debug messages, and draw diagrams of what they've discovered.

Collapse
 
panditapan profile image
Pandita

Not sure if it's common but the following is something I'm guilty of when I was junior: that every commit needs to be pushed to the repo 🙈

Now, I would commit BREAKING changes to the repo because I thought I had to commit and push my work at the end of the day regardless had I finished or not. It wasn't until the team decided to set some rules for commits, merges and deploys that I started to understand when/how to actually push my code (yes, they were created because of me 😂).

It really helped me understand the importance of a good established workflow in development ⭐

Collapse
 
viiik profile image
Eduard

Just fyi, you should definitely commit and push changes even if they are breaking, you dont wanna be in that situation where you accidentally delete your local changes (trust me, it's gonna happen).

Just don't merge them, and once you can get to it, you can uncommit the last commit with breaking changes or ammend it once it's done.

Collapse
 
panditapan profile image
Pandita

ah no totally!

It's just that we weren't using feature branches, we all worked and pushed to the same dev branch 🙈 A couple of years later, a new tech lead showed up and implemented a better branch workflow with MRs and git, we were using I think TFS.

I should've explained that a bit better in my initial comments, sorry!!

Collapse
 
bhargavsakaria profile image
Bhargav Sakaria • Edited

Can you give those guidelines here for better commit and development workflow which your company adopted. Just want to know what points to consider

Collapse
 
panditapan profile image
Pandita

Ah well, I forgot to explain it in my initial comment but in this team we weren't using your conventional git flow/system/that. We all worked and pushed to the same branch, so one of the rules was that I had to create atomic commits, aka, all my 1000000 changes in one single descriptive commit that had to be something like "backlogid/bugid - description of change - my name", and this was all created to curve my chaos askldjlaksjd

It was really hard afterwards to adopt the small commits paradigms (every change is a commit), I still have a hard time to be honest, I tend to commit only when I feel like I've done something big enough for a commit. Commiting barebone code (something I've seen advised) just feels weird to me ;w;

So, what I would advise is to use a more conventional git flow(?) and descriptive commits (regardless of size). If you're in a team that doesn't have it, try to identify bottlenecks/issues/etc and then you might need to do a bit of research to propose a good flow that can handle these issues. In my current team we implemented the conventional git flow (feature branches, dev branch, main branch and release branches), but since most of the users making the changes have little software experience and they need the changes NOW or else the sky will fall (and it will!), I sorta realized a trunk based approach with MRs would've been so much better than git flow, it actually evolved to just that 😂

tldr; Every team and project is different and you'll probably need to talk to your teammates and come up with guidelines together! :3

Hope this helps if not please let me know and I'll try to explain myself better because I'm not the best ✨

Collapse
 
fjones profile image
FJones

How to look for stuff.

Universally, junior devs I've met need a lot of help with two things: 1) Where to find the right article, SO question, documentation, etc that addresses the problem at hand and 2) how to look for the problem in the first place - where in the code is the error coming from? What impact could you observe depending on different logical branches?

I sum both of these under "how to look for stuff". Observation, exploration, search.

Collapse
 
dylanlacey profile image
Dylan Lacey

The number of times I've found an answer by searching GitHub or .node_modules specifically...

Collapse
 
fjones profile image
FJones

I find often it's things like "If this part of the code works, there will be an entry in the database. Do you know that it even gets this far, or does it break somewhere else? You'll find the problem much more easily if you can whittle down which side effects do and don't happen." Or "have you tried debugging the save call to go back the stack trace for where the erroneous save is triggered?". Or "Have you pasted the error message into Google? What are the common causes? Do any of them apply to our case?"

Collapse
 
tandrieu profile image
Thibaut Andrieu

Getting s**t done and don't drown into the endless improvement you can do to your code.

Perfect code doesn't exist, and you can spend your whole life refactoring again and again your code. The point is, you should not stop when the code is clean, you should stop when the code is good enough. Refactoring always leads to a Brownian motion, where you just go around in circles without moving forward. As long as you go forward, you can refactor, but it requires a minimum experience to feel when you just turn around without improving anything. And too much refactoring often leads to over design and more complicated code.

Collapse
 
citronbrick profile image
CitronBrick

this

Collapse
 
ravavyr profile image
Ravavyr

"abstraction" - holy hell it's hard those first few weeks coding to grasp that "something" can be separated into many "somethings" that combine to make the original "something". Until you grasp this, understanding objects and arrays is hard though i found arrays much easier than objects for a long time. I don't even know how i learned this stuff, but one day it just clicked finally, i think i had been coding like 2 years by then.

"recursion" - again, this is so confusing when you first encounter it because you have to be able to run the code in your mind, seeing it as it progresses through itself and "calls" itself again. While(true) and infinite for loops are hard to grasp and we all break things with them at some point.

"ask a dev" - so many newbies just dont' ask enough questions. They think they bother others by doing so, but in reality when a newbie asks you a question they help you retrain yourself on that information so the more newbie questions you answer the better a dev you can be. No one should work on a problem for more than 30 mins without asking someone more senior about it. A senior dev will spot the problem in 5 minutes or else in another 30 you add another seniorer dev and repeat. No problem goes unsolved for more than 2 hours this way.

"tabs over spaces" - it hurts my heart to see so many who just never learn to understand that one key stroke and 1 byte beats 2|4 key strokes and 2|4 bytes ANY DAY.

Collapse
 
teamradhq profile image
teamradhq

That the work is 80-90% reading and probably less than 10% actually writing code. I find they don't read logs, error messages or stack traces. I've found this to be true of a lot of mid-level developers I've worked with as well.

I think more than anything, these are the things I put most effort into when developing less experienced programmers:

  • Reading a stack trace effectively.
  • Monitoring logs effectively.
  • Using common command line tools (git/grep/tail/et. al) effectively.
Collapse
 
iamschulz profile image
Daniel Schulz

I'm not sure about concepts. People pick up on paradigms pretty quickly if you explain them within their perspective.

I think it's mostly the sheer number of new things at once when they start a job. In schools, university and courses, concepts are usually taught one by one. In a real job, it all works together simultaneously. You have to know your languages, your team's best practices, tests, git, etc. That's a lot.

The guidance aspect is to stay patient and encourage them to move forward.

Collapse
 
nasheomirro profile image
Nashe Omirro

Currently anxious about github committing/merging and working on projects with a team, the only experience I have is working on my own repos with a sprinkle of contributions to other ones. I'm not sure about other juniors, whether people generally expect them to have this be second-nature already.

Collapse
 
mistval profile image
Randall

Infinite recursion. At some point every newbie accidentally writes function a which calls a function b which then (insert arbitrary amount of other functions in the middle) calls function a again.

This is very confusing for newbies who don't know what they're looking at. I remember because I was stuck trying to debug this kind of problem for a whole day once, and eventually gave up and asked my mentor for help. He attached a debugger and instantly saw the infinite recursion by looking at the call stack.

Collapse
 
mykezero profile image
Mykezero

There usually comes that moment in a project (side project or work) where the DEV knows the syntax but doesn't know how to get to the solution. This is where the DEV is thrown deep into unfamiliar territories and is essentially tossed into a dark cave with no lighting for them to get out of.

Awesome enough, ChatGPT now kind of fills in this gap a bit easier, since it can recommend project types that the DEV may not know about or solutions that would come after hours of research on the internet and deep thinking. It's a really great time in development where something like this exists. Really cool stuff.

Personally, for me, I had a hard time understanding how writing to file systems worked. What is actually stored on the disk, how is the library actually doing this. Eventually, when enough pieces of knowledge collected, it was very simple: You have a data format, write it to disk in a way that's useful to someone or something thing, that was it.

Once you get enough of those knowledge pieces together, you form a foundation, with which you view your problem, that you can finally begin tackling bigger problems. Eventually, your knowledge expands from one programming language to many, crystalizing concepts into clear abstractions, useful to applying to any environment.

That is the moment, when finally all that hard work turns into something very fruitful; quite an awesome feeling.

Collapse
 
zhangli profile image
Zhang Li

Context.

Sometimes they might know some words and what they mean, but not sure where/how/what to apply.

e.g. I was going through some stuff with several juniors about the structure of our app. They seemed very enthusiastic for some reason. At the end, I asked if they had any questions. They asked when does the AI bit come in. I said this part is only for saving your interests in the profile (i.e. a CRUD app), the AI bit is handled in a different part of the system.

They assumed that updating the profile would feed the data in the model to do some complex AI stuff, but nope, just a normal CRUD app.

Collapse
 
rebecamurillo profile image
Rebeca Murillo

When something is not working it is difficult to just guess when you have little or no experience, so you might focus on the wrong problem. Which leads to the search problem of not using the right keywords and context when searching for possible solutions online.
I would also say correctly debugging in the dev environment is important but sometimes overlooked.

Collapse
 
samuelthng profile image
Sam • Edited

I often find myself explaining to my juniors (React related).

There is a difference between derived state and actual state. You don't need useState for everything. Try to keep your data clean as much as you can, the state should only contain the absolutely necessary.

Anything else can be derived in a useMemo (or even without useMemo if it's not expensive).

And also, to keep unrelated things out of the component because the component runs every render. That means the function you use to do some processing, and does not have any dependencies - yeah that goes outside. And unit test it.

Collapse
 
juanguerra1976 profile image
juan.guerra1976
 Harder things went beyond syntax in my case (which represented an entire "new 
 Universe" to learn)
 Someone in this thread already said the "magic word": abstraction.
 That's the real developer work (dare!) to recreate a problem (or pleasure!) into 
 code. That's was the real "tough guy in the block".
 I mean to get the "developer's mindset".
Enter fullscreen mode Exit fullscreen mode
Collapse
 
mfalconi profile image
mfalconi

I think DevOps is becoming an increasingly larger one. Procedure can be unclear if not well documented, and its such a critical component of development now. I think all devs should at least be familiar with the concept and if appropriate learn all relevant procedures well.

Collapse
 
uzair004 profile image
Muhammad Uzair

Understanding the problem is biggest problem then second one is 'where to start'.

Collapse
 
alanmbarr profile image
Alan Barr

Persevere and don't be afraid to ask for help.

Collapse
 
tim_birkett profile image
Tim Birkett

Simplicity. They write code at the limit of their ability which is not a clever thing to do.

Collapse
 
jackmamas profile image
jackmamas

Understanding the problem is the biggest problem then the second one is 'where to start'.
Justin waller wife

Collapse
 
ziyat4674 profile image
Zoya

Understanding the problem is the biggest problem then the second one is 'where to start'.
Justin waller age