Imagine you have an Apple device like a Macmini, MacBook, or an iMac in a remote location. You only have access to it via SSH and no Desktop GUI interaction is allowed.
What if you wanted to change the IP address of the device? For example, how do you assign a static IP address instead of DHCP?
Command line is your option in that case.
Let's see how to get it done...
Make sure you are in the sudoers list
To make changes like network interface configurations, you need to be a user with super user privileges.
Follow the below commands
First, get a list of all your network services.
networksetup -listallnetworkservices
That command will result in an output like below.
>networksetup -listallnetworkservices
An asterisk (*) denotes that a network service is disabled.
Apple USB Ethernet Adapter
USB 10/100/1000 LAN
Wi-Fi
Bluetooth PAN
Thunderbolt Bridge
Then use the desired service name in the following command:
networksetup -setmanual SERVICE IP SUBNET ROUTER
For example, to change the IP address of my Wi-Fi interface, I would use a command like this:
networksetup -setmanual Wi-Fi 192.168.1.2 255.255.255.0 192.168.1.1
In the above example, 192.168.1.2
is my new IP address. 192.168.1.1
is the address of the default gateway, which is the router most of the time.
Setting it back to DHCP
To set it back to DHCP, use the following command:
networksetup -setdhcp SERVICE
Keep DHCP with a manual IP
To keep DHCP services but only use a manually designated IP address, then use the following command:
networksetup -setmanualwithdhcprouter SERVICE IP
Confirm settings are permanent
Restart the device sudo shutdown -r now
and see if the new address persists.
If everything goes well, it should persist.
Top comments (0)