DEV Community

Cover image for Mastering Selenium Testing: JUnit Asserts With Examples
Hari Sapna Nair
Hari Sapna Nair

Posted on • Updated on • Originally published at lambdatest.com

Mastering Selenium Testing: JUnit Asserts With Examples

Automation testing helps to ease the life of software testers by allowing them to automate their repetitive tasks, and open-source test automation frameworks like Selenium have enabled users to automate web testing experience at scale. However, what good is automation testing if you cannot verify whether a test case has passed or failed?

This is where assertions come into the picture. They allow you to keep track of the number of test failures or successes encountered after executing your automation script for Selenium testing. Let’s look at examples to learn how to assert in JUnit and the different assert methods used in JUnit.

We will start with a basic introduction to assertions in JUnit and then cover the various assert methods in JUnit, focusing on the assertTrue() method. If you are preparing for an interview you can learn more through Selenium interview questions.

Simplify your data transformation with our JSON Stringify tool. Try it now!

What Are Assertions?

Assertions in software testing are statements that verify expected outcomes during test execution. Assertions act as a checkpoint between actual and anticipated results, which helps in the early detection of issues and improves the reliability of the overall software testing life cycle.

Types of Assertions

There are two types of assertions for Selenium testing: hard assertions and soft assertions.

Hard Assertions

Hard assertions are used when we want our test script to halt immediately if the assertion conditions do not match the expected result. If the assertion condition fails to meet the expected outcome, an assertion error will be encountered, and the test case under execution will be marked as failed.

The login situation can be used as an example of a hard assertion. A hard assert can stop the test’s execution immediately if incorrect login credentials are found. This prevents the execution of subsequent test actions because the test case can’t continue without the correct login credentials.

Methods used for hard assertions are **assertEquals(), assertTrue(), assertFalse(), assertNotNull(), **etc.

Soft Assertions

In soft assertions, the test script continues its execution seamlessly even if one of the assertions fails. Moreover, with soft assertions, assertion failure conditions don’t trigger any error, ensuring uninterrupted execution of test scripts as they seamlessly proceed to the next test case.

Soft assertions in Selenium can verify multiple page elements on a landing page. They allow all steps to execute and throw an error only at the end of the @test() method.

The assertAll() method can be used for soft assertion.

Ready to set up your JUnit environment for your first test? The blog “How To Setup JUnit Environment For Your First Test” guides you through the process step-by-step.

Generate unique characters effortlessly using our Random Character Generator tool!

Assert Methods In JUnit

To use JUnit assert methods, we have to import the “org.junit.jupiter.api.Assertions” class. All the JUnit assertion methods are static methods, providing a range of utility methods to assert conditions in tests. Now, we will look into different methods to assert in JUnit by examples.

If you are not familiar with JUnit, you can refer to our blog: Automated Testing with JUnit and Selenium for Browser Compatibility.

assertTrue() in JUnit

If you wish to pass the parameter value as True for a specific condition invoked in a method, you can use the assertTrue() in JUnit. You can use JUnit assertTrue() in two practical scenarios.

Syntax

  • By passing condition as a boolean parameter used to assert in JUnit with the assertTrue() method. It throws an AssertionError (without message) if the condition given in the method isn’t True.

    https://www.lambdatest.com/lp/best-automation-testing-tool

  • By passing two parameters simultaneously in the assertTrue() method. One parameter would be an assertion error message, and the second parameter would specify the particular condition against which we need to apply our assertion method as True. It throws an AssertionError (with message) if the condition given in the method is not True.

    Assert.assertTrue(String message, boolean assertCondition);
    

Let us understand assertTrue() in JUnit with the help of an example.

We want to verify that when users navigate to the E-Commerce LambdaTest, they are taken to the correct URL. We’ve written “assertURL()” test method to automate this verification process.

Code for *assertTrue() *in JUnit:

import org.junit.AfterClass;
import org.junit.Assert;
import org.junit.Test;
import org.junit.BeforeClass;
import org.openqa.selenium.WebDriver;
import org.openqa.selenium.chrome.ChromeDriver;


public class Main {
    static WebDriver driver = new ChromeDriver();


    @BeforeClass
    public static void openBrowser() {
        driver = new ChromeDriver();
        driver.manage().window().maximize();
    }


    @Test
    public void assertURL() {
        driver.get("https://ecommerce-playground.lambdatest.io/");


        String actualURL = driver.getCurrentUrl();
        System.out.println("URL : " + actualURL);


        String expectedURL = "https://ecommerce-playground.lambdatest.io/";


        Assert.assertTrue("URL does not match", expectedURL.equals(actualURL));
        System.out.println("Test Passed");
    }


    @AfterClass
    public static void closeBrowser() {
        driver.close();
    }
}
Enter fullscreen mode Exit fullscreen mode

In the above code, we can see that we have provided two parameters in the **assertTrue() **method, which is an assertion error message and a boolean condition. If the condition does not match or is not true, then the assertion error will be thrown, and execution of the program will get terminated at this same line, i.e., an assertion statement itself.

So, in this scenario, assertTrue() in JUnit acts as your validation tool, confirming that the URL you expect (https://ecommerce-playground.lambdatest.io/) is indeed the URL you’ve navigated to (https://ecommerce-playground.lambdatest.io/). As both are equal, the test passes, giving you confidence in the correctness of the website’s URL.

Output:

If we do not want to provide an assertion error message, we can provide the condition as seen in the syntax mentioned above.

Discover new hues instantly with our Random Color Generator. Check it out!

assertEquals()

The JUnit assertEquals() method compares the equality of the expected result with the actual result. When the expected result we provided does not match the actual result of the Selenium testing script, which we get after the action is performed, it throws an assertion error. This leads to the termination of the execution of the test script at that line itself.

The assertEquals() method in JUnit is overloaded to accommodate various data types, including byte, char, double, float, int, long, Object, and short. In addition, error messages can be included as arguments to provide context when a test fails.

Syntax:

// Comparing integers
Assertions.assertEquals(int expected, int actual)


// Comparing objects
Assertions.assertEquals(Object expected, Object actual)


// Comparing objects with an assertion error message
Assertions.assertEquals(Object expected, Object actual, String message)    
Enter fullscreen mode Exit fullscreen mode

Here is a JUnit assertEquals() example to help you understand the process better.

@Test
    public void assertURL() {
        driver.get("https://ecommerce-playground.lambdatest.io/");
        String actualURL = driver.getCurrentUrl();
        System.out.println(actualURL);
        Assertions.assertEquals("https://ecommerce-playground.lambdatest.io/", actualURL);
        System.out.println("Test Passed");
    }
Enter fullscreen mode Exit fullscreen mode

In the above code, we can see that we have provided two parameters in the JUnit **assertEquals() **method: an expected result and an actual result. If the value of “actualURL” does not match the expected URL mentioned in the Selenium testing script, then the assertion error will be thrown, and execution of the program will get terminated at this same line, i.e., the assertion statement itself.

We can also pass an assertion error message as a parameter shown in syntax.

JUnit assertEquals() for Floating Point Assertion

When comparing floating point types (e.g., double or float), we must provide an additional parameter known as delta to avoid rounding errors.

The value for delta can be evaluated as:

Math.abs(expected — actual) = delta

If there is any marginal difference in the expected and actual values due to rounding off, those can be considered the same, and the assertion should be marked as pass. So, the delta value given by the user decides which margin value should be considered fine to pass that assertion.

Assert JUnit Example for Floating Point Assertion

@Test
    public void assertValue() {      
        double actualDoubleValue= 2.999;
        double expectedDoubleValue = 3.000;

        Assertions.assertEquals(expectedDoubleValue, actualDoubleValue, 0.001);

        System.out.println("Test Passed");            
    }
Enter fullscreen mode Exit fullscreen mode

This method, “assertValue,” compares two double values: “actualDoubleValue” (initialized as 2.999) and “expectedDoubleValue” (initialized as 3.000), with a precision of 0.001. If they’re approximately equal, “Test Passed” is printed.

Create random MAC addresses easily with our Random MAC Generator tool. Give it a try!

assertFalse()

We can make use of the assertFalse() method to verify whether a given condition is False or not.

Syntax:

Assertions.assertFalse (boolean condition)


// With an assertion error message
Assertions.assertFalse (boolean condition, String message)
Enter fullscreen mode Exit fullscreen mode

Note: The **assertFalse() **method supports only a boolean value as a parameter.

Let us look at an assert JUnit example Selenium test script for assertFalse():

@Test
    public void assertURL() {
        driver.get("https://ecommerce-playground.lambdatest.io/");


        String actualURL = driver.getCurrentUrl();
        System.out.println(actualURL);


        String expectedURL = "https://www.google.com/";


        Assertions.assertFalse(expectedURL.equals(actualURL), "URL does match");
        System.out.println("Test Passed");
    }
Enter fullscreen mode Exit fullscreen mode

In the above Selenium test script, we can see that we have provided two parameters in the assertFalse() method: an assertion error message and a boolean condition. Suppose the condition does match or is not false. In that case, the assertion error will be thrown, and the program’s execution will terminate at this same line, the assertion statement itself.

If we do not want to provide an assertion error message, we can just provide a condition, as we can see in the syntax mentioned above.

assertNull()

To verify whether a passed object contains a null value, we use the assertNull() method. This method helps display an assertion error if the object does not have null values. It only supports the object data type as its parameter. In addition, error messages can be included as arguments to provide context when a test fails.

Syntax:

Assertions.assertNull(Object obj);


// With an assertion error message
Assertions.assertNull(Object obj, String msg);
Enter fullscreen mode Exit fullscreen mode

Let us look at an example Selenium test script for JUnit assertNull().

@Test
    public void assertURL() {
        driver.get("https://ecommerce-playground.lambdatest.io/");

        String actualURL = driver.getCurrentUrl();
        System.out.println(actualURL);

        String expectedURL = null;

        // Assertion    
        // Assertions.assertNull("Not Null",actualURL);
        // OR
        Assertions.assertNull(expectedURL, "Not Null");

        System.out.println("Test Passed");  
    }
Enter fullscreen mode Exit fullscreen mode

In the above code, we can see that we have provided two parameters in the **assertNull() **method: an assertion error message and an object. If the provided object is not null, the assertion error will be thrown, and the program’s execution will terminate at this same line, the assertion statement itself.

When the “actualURL” is passed as an object, an assertion error is thrown as it is not null. Conversely, when we pass the “expectedURL,” assertion passes, indicating that the expected URL is indeed null, and “Test Passed” is printed to the console.

If we do not want to provide an assertion error message, then we can provide an object, as we can see in the syntax mentioned above.

assertNotNull()

**assertNotNull() *method checks if the provided object does not hold a null value. We can pass an object as a parameter in this method and get an assertion error if the object we pass does hold *NULL”** values along with the assertion error message if provided.

Syntax:

Assertions.assertNotNull(Object obj);


// With an assertion error message
Assertions.assertNotNull(Object obj, String msg);
Enter fullscreen mode Exit fullscreen mode

Let us look at an assert JUnit example Selenium test script for assertNotNull():

@Test
    public void assertURL() {
        driver.get("https://ecommerce-playground.lambdatest.io/");

        String actualURL = driver.getCurrentUrl();
        System.out.println(actualURL);

        String expectedURL = null;

        // Assertion    
        Assertions.assertNotNull(actualURL, "Not Null");
        // OR
        // Assertions.assertNotNull(expectedURL, "Not Null");

        System.out.println("Test Passed");  
    }
Enter fullscreen mode Exit fullscreen mode

In the above code, we can see that we have provided two parameters in the assertNotNull() method: an assertion error message and an object. If the provided object is null, only the assertion error will be thrown, and the program’s execution will get terminated at this same line, i.e., the assertion statement itself.

When the “actualURL” is passed as an object, then assertion passes, indicating that the expected URL is not null, and “Test Passed” is printed to the console. When we pass the “expectedURL”, an assertion error is thrown as it is null.

If we do not want to provide an assertion error message, we can just provide an object, as seen in the syntax mentioned above.

Get random numbers quickly using our Random Number Generator. Try it today!

assertSame()

While performing Selenium testing, you may often encounter a scenario where you need to compare two different objects passed as parameters in a method to evaluate whether they refer to the same object or not. This is where you can use JUnit assertSame(). An assertion error is displayed if the two objects don’t refer to the same object. Also, we will receive an assertion error message if the message is provided as shown in the syntax below.

Syntax:

Assertions.assertSame (Object expected, Object actual)


// With an assertion error message
Assertions.assertSame (Object expected, Object actual, String message)
Enter fullscreen mode Exit fullscreen mode

Note: It only supports the object data type as its parameter.

Let us look at an assert JUnit example Selenium test script for assertSame():

@Test
    public void assertString() {      
        String actual = "LambdaTest";
        String expected = actual;
        String other = "JUnit";

        // Assertion
        Assertions.assertSame(expected, actual, "Strings not same");

        // OR
        // Assertions.assertSame(expected, other, "Strings not same");

        System.out.println("Test Passed");  
    }
Enter fullscreen mode Exit fullscreen mode

This “assertString” method is a JUnit test case that aims to verify the equality of two string objects. Initially, both “expected” and “actual” strings are assigned the value “LambdaTest.” The “Assert.assertSame()” method is then employed to assert that both strings reference the same object in memory, ensuring that they are identical instances. If the assertion succeeds, indicating that both strings are references to the same object, the message “Test Passed” is printed to the console.

When “expected” and “other” strings are passed as objects, the assertion statement checks whether the references of expected and others point to the same object in memory. Since “LambdaTest” and “JUnit” are different string literals, they are stored as separate objects in memory. Therefore, the assertion fails, the execution of the method halts, and “Test Passed” is not printed to the console.

If we do not want to provide an assertion error message, we can just provide an object, as seen in the syntax mentioned above.

assertNotSame()

**assertNotSame() **method verifies that if the two objects we passed as parameters are not equal. If both objects have the same references, an Assertion Error will be thrown with the message we provided (if any).

One more thing to observe in this method is that it compares references to objects and not the values of those objects.

Syntax:

Assertions.assertNotSame (Object unexpected, Object actual)


// With an assertion error message
Assertions.assertNotSame (Object unexpected, Object actual, String message)
Enter fullscreen mode Exit fullscreen mode

**Note: **It only supports the object data type as its parameter.

Let us look at an assert JUnit example Selenium test script for assertNotSame():

@Test
    public void assertString() {      
        String actual = "LambdaTest";
        String expected = actual;
        String other = "JUnit";

        // Assertion
        Assertions.assertNotSame(expected, actual, "Strings are not same");

        // OR
        // Assertions.assertNotSame(expected, other, "Strings are not same");

        System.out.println("Test Passed");  
    }
Enter fullscreen mode Exit fullscreen mode

This “assertString” method is a JUnit test case that aims to verify the equality of two string objects. Initially, both “expected” and “actual” strings are assigned the value “LambdaTest”. The “Assert.assertNotSame()” method verifies that the references of expected and actual do not point to the same object in memory. Since both expected and actual are initialized with the exact string literal “LambdaTest,” they are likely referencing the same object in memory. Thus, the assertion is expected to fail. Upon failure, the execution halts, and “Test Passed” is not printed to the console.

When “expected” and “other” strings are passed as objects, the assertion statement checks whether the references of expected and other do not point to the same object in memory. Since “LambdaTest” and “JUnit” are different string literals, they will likely be stored as separate objects in memory. Therefore, the assertion is expected to pass. Upon successful assertion, “Test Passed” is printed to the console, indicating that the test has successfully verified that “expected” and “other” are indeed referencing different objects in memory.

If we do not want an assertion error message, we can just provide an object, as seen in the above mentioned syntax.

assertArrayEquals()

**assertArrayEquals() **method verifies that the two object arrays we passed as parameters are equal. If both the object arrays have null values, then they will be considered equal.

The “assertArrayEquals()” method in JUnit is versatile, as it’s overloaded to accommodate various data types, including boolean, byte, char, double, float, int, long, Object, and short. This allows efficient comparison of arrays of different primitive types and objects within test cases. This method will also throw an Assertion Error with the message provided if both the object arrays we passed as parameters in the method are not considered equal.

Syntax

// For integer arrays
Assertions.assertArrayEquals (int expected, int actual)


// For object arrays
Assertions.assertArrayEquals (Object expected, Object actual)


// With an assertion error message
Assertions.assertArrayEquals (int expected, int actual, String message)  
Enter fullscreen mode Exit fullscreen mode

Let us look at an assert JUnit example Selenium test script for assertArrayEquals():

@Test
    public void asserArrays() {      
        // Create two arrays to compare
        int[] expectedArray = {1, 2, 3, 4};
        int[] actualArray = {1, 2, 3, 4};


        // Assert that the arrays are equal  
        Assertions.assertArrayEquals(expectedArray, actualArray, "Arrays are not equal");
        System.out.println("Test Passed");  
    }
Enter fullscreen mode Exit fullscreen mode

This JUnit test method,*** assertArrays(),*** verifies the equality of two arrays, expectedArray and actualArray, using the*** assertArrayEquals() ***method. If the arrays are equal, the test passes and prints “Test Passed”. If they are not equal, the test fails with the assertion error message “Arrays are not equal.”

If we do not want to provide an assertion error message, we can just provide an object, as we can see in the syntax mentioned above.

assertAll()

The newly added method assertAll() will be executed to check all the assertions as grouped assertions. It has an optional heading parameter that allows to recognize a group of assertions with that method assertAll(). At the time of failure, the assertion error message shows detailed information about each and every field assertion used in that group.

Syntax:

Assertions.assertAll(executables...);
Enter fullscreen mode Exit fullscreen mode

Here, executables represent one or more instances of Executable interface, typically lambda expressions or method references, that encapsulate the assertions to be performed. The “assertAll()” method verifies all assertions provided by the executables, and if any of them fail, it aggregates the failures and reports them together.

Let’s look at an assert JUnit example for assertAll() with the grouped assertion:

@Test
    public void assertURL() {
        driver.get("https://ecommerce-playground.lambdatest.io/");


        String actualURL = driver.getCurrentUrl();
        System.out.println(actualURL);
        String expectedURL="https://ecommerce-playground.lambdatest.io/";

        String actualTitle =  driver.getTitle();
        System.out.println(actualTitle);
        String expectedTitle = "Your Store";

        Assertions.assertAll(
                () -> Assert.assertEquals(expectedURL, actualURL),
                () -> Assert.assertEquals(expectedTitle, actualTitle)
                );

        System.out.println("Test Passed");
    }
Enter fullscreen mode Exit fullscreen mode

In the “assertURL()” test method, the Selenium WebDriver navigates to the LambdaTest website and captures the current URL and page title. Using assertAll(), it groups together two assertEquals() assertions, comparing the expected and actual URL and title. If both comparisons hold true, indicating that the URL and title match expectations, the test pass and “Test Passed” is printed.

assertIterableEquals()

The assertIterableEquals() method verifies whether two iterables are equal. It compares the elements of the iterables sequentially, ensuring they have the same size and contain equivalent elements in the same order. This method is particularly useful for comparing collections like lists, sets, and queues, providing a concise and efficient way to validate their contents in test cases.

Syntax:

Assertions.assertIterableEquals(Iterable<?> expected, Iterable<?> actual)


// With assertion error message
Assertions.assertIterableEquals(Iterable<?> expected, Iterable<?> actual, String message)
Enter fullscreen mode Exit fullscreen mode

Let’s look at an assert JUnit example for*** assertIterableEquals()*** method:

@Test
    public void assertIterable() {
        List<Integer> firstList = Arrays.asList(1, 2, 3);
        List<Integer> secondList = Arrays.asList(1, 2, 3);
        List<Integer> thirdList = Arrays.asList(3, 1, 2);

        Assertions.assertIterableEquals(firstList, secondList, "Not Same List");
        // OR
        // Assertions.assertIterableEquals(firstList, thirdList, "Not Same List");


        System.out.println("Test passed");
    }
Enter fullscreen mode Exit fullscreen mode

When the elements passed are firstList and secondList, the test passes, indicating that the lists are equal. When the elements passed are firstList and thirdList, the test fails, indicating a discrepancy between the elements or their order.

assertTimeout()

The assertTimeout() method in JUnit is used to ensure that the execution of the system under test is complete within a specified timeframe. It accepts various parameters, such as a duration object and an executable, allowing flexibility in defining the execution boundaries. This method empowers testers to enforce time constraints on test executions, ensuring timely and reliable validation of system behavior.

Additionally, it supports the inclusion of error messages as arguments to provide context in case of test failure, aiding in diagnosing issues when the timeout condition is breached.

Syntax:

Assertions.assertTimeout (Duration timeout, Executable executable)


// With an assertion error message
Assertions.assertTimeout (Duration timeout, Executable executable, String message)
Enter fullscreen mode Exit fullscreen mode

Let’s look at an assert JUnit example for*** assertTimeout() ***method:

@Test
    public void testTimeout() {
        // Assert that an operation completes within 1 minute
        Assertions.assertTimeout(Duration.ofMinutes(1), () -> {
            // Simulate a time-consuming operation (
            performTimeConsumingOperation();
        });


        // Assert that an operation completes within 100 milliseconds
        // Assertions.assertTimeout(Duration.ofMillis(100), () -> {
            // Simulate a time-consuming operation that exceeds the timeout
            //Thread.sleep(200);
        //});

        System.out.println("Test passed");
    }


    // Method to simulate a time-consuming operation
    public void performTimeConsumingOperation() {
        // Simulate a time-consuming operation
        try {
            Thread.sleep(500); // Simulate a 500-millisecond operation
        } catch (InterruptedException e) {
            e.printStackTrace();
        }
    }
Enter fullscreen mode Exit fullscreen mode

The first assertion specifies a timeout duration of one minute. Within this duration, the performTimeConsumingOperation() method is called, which simulates a time-consuming operation, and if this operation completes within the specified timeout, the test passes; otherwise, it fails, indicating that the operation took longer than expected.

The second assertion defines a shorter timeout of 100 milliseconds. Here, a time-consuming operation that exceeds the timeout duration is attempted by introducing a delay of 200 milliseconds. As this operation surpasses the specified timeout, the test fails, highlighting the effective enforcement of time constraints in test executions.

assertTimeoutPreemptively()

The*** assertTimeoutPreemptively()*** method in JUnit 5 is similar to*** assertTimeout(). Still, with*** one key difference, i.e., it forcefully interrupts the execution of the test if it exceeds the specified timeout duration. This preemptive interruption ensures that the test does not continue executing beyond the defined time limit, even if the code under test does not respond to interruption signals. It supports the duration object and an executable.

Syntax:

Assertions.assertTimeoutPreemptively(Duration timeout, Executable executable)


// With assertion error message
Assertions.assertTimeout Preemptively(Duration timeout, Executable executable, String message)
Enter fullscreen mode Exit fullscreen mode

Let’s look at an assert JUnit example for assertTimeoutPreemptively() method:

<em>@Test</em>
 void testTimeoutPreemptively() {
         <em>Assertions.assertTimeoutPreemptively</em>(Duration.ofSeconds(1), () -> {
             // Simulate a time-consuming operation 
             while (true) {
                // Infinite loop to simulate a time-consuming operation
              }
         });
    }
Enter fullscreen mode Exit fullscreen mode

In this example, as the code within the lambda expression does not execute in one second and the assertTimeoutPreemptively() will forcefully terminate the test, preventing it from continuing indefinitely.

Ensure strong security with our Random Password Generator. Generate now!

fail()

The*** fail()*** method in JUnit is a way to mark a test as failed programmatically. It allows us to specify a message indicating the reason for the failure. This approach allows for precise error reporting and aids in diagnosing issues encountered during test execution. It supports a string and throwable values as parameters.

Syntax:

// With error message


Assertions.fail(String message)


// With error messaage and cause


Assertions.fail(String message, Throwable cause)
Enter fullscreen mode Exit fullscreen mode

Let’s look at an assert JUnit example for*** fail()*** method:

@Test


    public void testFunction() {


        // Perform some checks


        try {


            // Simulate an error condition


            throw new RuntimeException("Error occurred during test execution");


        } catch (RuntimeException error) {


            // If an error occurs, fail the test with a custom message and the associated exception


            Assertions.fail("Test failed due to an error", error);


        }


    }
Enter fullscreen mode Exit fullscreen mode

In this JUnit test method*** testFunction**(), we simulate an error condition by intentionally throwing a RuntimeException with a specific error message (“Error occurred during test execution”). Within the catch block, we call *fail() **method to explicitly mark the test as failed, providing a custom error message and the associated exception.

assertThrows()

The **assertThrows() *is another newly added method in JUnit 5 to replace the **ExpectedException* Rule from JUnit 4. Now, all assertions can be made against the returned instance of a class Throwable, making the test scripts more readable. As executables, we can use lambdas or method references.

Syntax:

Assertions.assertThrows (Class<T> expectedType, Executable executable)


// With assertion error message


Assertions.assertThrows (Class<T> expectedType, Executable executable, String message)
Enter fullscreen mode Exit fullscreen mode

**Note: **It supports only exception classes and executable as parameters.

Let’s look at an assert JUnit example for **assertThrows() **method:

@Test


    public void testDivideByZero() {


        // Define a lambda expression to call the method that you expect to throw an exception


        Assertions.assertThrows(ArithmeticException.class, () -> divide(10, 0));


        System.out.println("Test Passed");


    }


    // Method that performs division


    public double divide(int dividend, int divisor) {


        if (divisor == 0) {


            throw new ArithmeticException("Cannot divide by zero");


        }


        return dividend / divisor;


    }
Enter fullscreen mode Exit fullscreen mode

In the*** testDivideByZero() **method, *assertThrows() *method is used to verify that invoking the *divide()** method with arguments 10 and 0 results in an ArithmeticException being thrown, as expected. The test passes if the exception is thrown, indicating an attempt to divide by zero. Additionally, “Test Passed” is printed on the console, affirming the successful completion of the test.

This JUnit Tutorial for beginners and professionals will help you learn JUnit Assertions in Selenium.

Third-Party Assertions In JUnit

JUnit Jupiter provides sufficient assertion facilities for most testing scenarios. Still, some scenarios require additional functionalities, such as matchers, that are not provided by JUnit Jupiter.

For such scenarios, the JUnit team recommends using third-party assertion libraries like *Hamcrest, AssertJ, Truth, *etc. Users can use these third-party libraries whenever necessary.

For an assert JUnit example, we can use a combination of matchers and a fluent API to make assertions more descriptive and readable.

JUnit Jupiter’s (JUnit 5) org.junit.jupiter.api.Assertions class does not provide the method assertThat() that was available with the org.junit.Assert class in JUnit 4, which accepts a Hamcrest Matcher. That way, you can leverage the built-in support for matchers offered by third-party assertion libraries.

Assert JUnit Example for Selenium Testing using Third-Party assertions:

@Test


    public void testPageTitleContainsSubstring() {


        // Navigate to the web page


        driver.get("https://ecommerce-playground.lambdatest.io/");


        // Get the title of the web page


        String title = driver.getTitle();


        // Verify that the title contains the specified substring using Hamcrest matcher


        assertThat(title, containsString("Store"));




        System.out.println("Test passed");


    }
Enter fullscreen mode Exit fullscreen mode

In the*** testPageTitleContainsSubstring()*** test method, the Selenium WebDriver navigates to the LambdaTest website. After retrieving the web page’s title, it verifies that the title contains the specified substring “Store” using the Hamcrest matcher containsString() method. If the substring is found in the title, the test passes. Additionally, “Test passed” is printed on the console, indicating the successful completion of the test.

You can find the GitHub repository for all the above codes at this GitHub repo.

Bonus Resource

According to Statista Research Department’s stats published on 21 February 2024, in 2023, JUnit was the primary technology used among test frameworks and tools, with 34% of respondents worldwide reporting the same. This comes after a small dip in 2022, when it was only 31%.

Hence, a professional certification in JUnit is worth considering to increase your credibility in the talent pool. You can also check JUnit certification from LambdaTest. LambdaTest is an AI-powered test orchestration and execution platform that lets you run manual and automated tests at scale on over 3000 real devices, browsers, and OS combinations.

This JUnit Certification establishes testing standards for those who wish to advance their careers in Selenium automation testing with JUnit.

Here’s a short glimpse of the JUnit certification from LambdaTest:

You can also subscribe to the LambdaTest YouTube Channel for more videos on Assertions In pytest, Assertions in Selenium, and Assertions in TestNG to enhance your testing experience!

Conclusion

Assertions are indispensable if you are performing Selenium. They help us determine whether a test case has passed or failed by evaluating the parameters passed into objects through our Selenium testing scripts. If you wish to manage automation logs neatly and organize them, assertions can do wonders for you.

So far, we have learned various methods to assert in JUnit, like **assertTrue() *in Junit, *assertThrows()** in Junit, etc., with examples. We also dwelled upon the difference between JUnit5 and JUnit4 with respect to assertions in JUnit. We also covered the newly introduced assertions and third-party assertions in JUnit.

Top comments (1)

Collapse
 
solvice profile image
Solvice

Cool

Some comments may only be visible to logged-in visitors. Sign in to view all comments.