DEV Community

Cover image for Aw, snap - refresh web app in Chromium kiosk mode after it breaks
Kai Walter
Kai Walter

Posted on • Edited on

Aw, snap - refresh web app in Chromium kiosk mode after it breaks

Inspired by Scott Hanselmans wall mounted Family Calendar I installed a monitor with an attached Raspberry Pi Zero W 2 years back and been experimenting with various technical approaches to host the web page for this family board. Currently it is Blazor WebAssembly.

This app occasionally breaks (or has to recover from a wireless connection loss). Surely I will invest some time in the future to get down to the actual root cause of the problem, but until then I wanted to have a more or less intelligent way of refreshing when the kiosk app breaks.

setup required

  • Linux scrot utility to capture screen
  • Python 3 with PIL library installed to evaluate color of captured screen
  • xdotool to refresh Chromium page

shell script to drive the process

The script evalscreen.sh

  1. uses scrot to capture a low quality (20% is sufficient for evaluation) screen image
  2. runs image through Python script evalimage.py (see below)
  3. with Python script signals an error level not equal to 0 a refresh with xdotool is initiated
#!/bin/sh

export DISPLAY=:0.0
export XAUTHORITY=/home/pi/.Xauthority

scrot -q 20 screen.png

$(dirname "$0")/evalimage.py

if [ $? -eq 0 ]
then
    echo $(date -u) "OK"
else
    echo $(date -u) "Aborted->Refresh"
    xdotool key --window $(xdotool getactivewindow) ctrl+R
fi
Enter fullscreen mode Exit fullscreen mode

This script is scheduled each minute with cron:

# m h  dom mon dow   command
*/1 *   *   *   *    /home/pi/evalscreen/evalscreen.sh >> /home/pi/evalscreen/evalscreen.log 2>&1
Enter fullscreen mode Exit fullscreen mode

Python script to evaluate the image

Based on this StackOverflow post I created this Python script evalimage.py that determines the most present color in the captured image. As my family board has a black background I assume when the most present color is not black, it is broken. When assumed broken it exits with error level 1.

#! /usr/bin/python

from PIL import Image
import sys

def get_main_color(file):
    img = Image.open(file)
    colors = img.getcolors(256*1024) #put a higher value if there are many colors in your image
    max_occurence, most_present = 0, 0
    try:
        for c in colors:
            if c[0] > max_occurence:
                (max_occurence, most_present) = c
        return most_present
    except TypeError:
        #Too many colors in the image
    return (0, 0, 0)

if get_main_color('screen.png') != (0, 0, 0):
    print('Aw,snap')
    sys.exit(1)
Enter fullscreen mode Exit fullscreen mode

cleaning up

Not to forget that the growing log file needs to be kept in check. For that I added a file /etc/logrotate.d/evalscreen:

/home/pi/evalscreen/evalscreen.log {
  rotate 12
  daily
  compress
  missingok
  notifempty
}
Enter fullscreen mode Exit fullscreen mode

use & extend

You may use and extend these scripts from my repo by just cloning it to your pi users home.

closing

After looking into the issue itself after some days it turned out that I just needed to do a clean reinstall of chromium-browser and rpi-chromium-mods.

Top comments (4)

Collapse
 
sujal profile image
sujal

Hey there - this is a nice little utility. I'm about to modify it for my own kiosk screens at home. Do you have this checked into GitHub anywhere? Happy to fork and adapt so that people can easily follow along (and collaborate if needed). If not, will just reference this post when I stick it in my home automation catch all project.

Thanks for putting this together.

Sujal

Collapse
 
kaiwalter profile image
Kai Walter • Edited

Hey Sujal, sure not a problem. Added this repo: github.com/KaiWalter/evalscreen

Collapse
 
flavio_frontini_9b6718c36 profile image
Flavio Frontini

Hello, its really what i was looking for. Unfortunately i am not able to make it working on my Pi Zero. I get:
File "./evalimage.py", line 19
if get_main_color('screen.png') != (0, 0, 0):
^
IndentationError: expected an indented block

Do you have an idea of why?
Thank you!

Collapse
 
linehammer profile image
linehammer

Putting in an extra space or leaving one out where it is needed will surely generate an error message . I'd suggest using only tabs or only spaces for indentation. Using only spaces is generally the easier choice. Most editors have an option for automatically converting tabs to spaces. If your editor has this option, turn it on. Some common causes of this error include:

Forgetting to indent the statements within a compound statement
Forgetting to indent the statements of a user-defined function.

The error message IndentationError: expected an indented block would seem to indicate that you have an indentation error. It is probably caused by a mix of tabs and spaces . The indentation can be any consistent white space . It is recommended to use 4 spaces for indentation in Python, tabulation or a different number of spaces may work, but it is also known to cause trouble at times. Tabs are a bad idea because they may create different amount if spacing in different editors .

net-informations.com/python/err/in...