DEV Community

Cover image for Can I Read? Analyze if a webpage is safe for reading (Web scraping using Puppeteer)
Caleb David
Caleb David

Posted on

Can I Read? Analyze if a webpage is safe for reading (Web scraping using Puppeteer)

What are we building?

As a frontend engineer, you probably have come across the site caniuse.com - it tells you what web features are supported by different browsers. It also helps you make guided decisions upfront regarding your site's accessibility using different browsers.

The tool we will be building today is going to assess any given webpage and then give us its verdict whether that page is worth our time to read or not based on the the occurences of some certain keywords. It is very handy for avid article readers.

Costly assumptions

We are going to make a few assumptions here:

  1. If a webpage contains more "positive words" than "negative words", we presume the page to be safe for reading.

  2. If a webpage contains more "negative words" than "positive words", then we presume that the page is not worth our time - it may ruin our day ๐Ÿ˜†.

Keyword files

The "positive" and "negative" keywords list can be obtained on Github by jeffreybreen, that's an incredible compilation, a big shout-out to the author. Links to the two files on Github below:

Citation: Minqing Hu and Bing Liu. "Mining and Summarizing Customer Reviews."
Proceedings of the ACM SIGKDD International Conference on Knowledge Discovery and Data Mining (KDD-2004), Aug 22-25, 2004, Seattle, Washington, USA,

Limitations

The approach we are using for analyzing the page will not always work out 100% correctly because we are not using natural language processing to analyze the whole context in which the keywords are used in the page (as in sentiment analysis systems), we are solely relying on word count frequency. I have plans to add support for NLP in subsequent series of this post, so keep an eye here if that interests you.

Thought process

As usual, it always pays to highlight our thought process because it will help steer our direction big time in this wild ride.

  1. Convert the keywords text files to JSON files. The resulting json files will hold all the keywords in an array.

  2. Get the address of the webpage we want to analyze and make a request to it.

  3. Extract the text content of that page.

  4. Compare each keyword in the JSON files with the extracted text and record each keyword's frequency in that extracted text (for both keyword files).

  5. Sum the total number of positive keywords appearances and do same for the negative keywords

  6. The category with the higher number determines if the page is worth reading or not. That is, if we end up with more positive keywords in the page, we mark that webpage as safe for reading and the opposite for the negative keywords.

Alright, let's wish ourselves success and hope our terminal don't get mad at us because we are just about to bounce on it. ๐Ÿ˜„.ย 

Initialize a new project directory

mkdir can-i-read && cd can-i-read && npm init -y
Enter fullscreen mode Exit fullscreen mode

We will download two packages: puppeteer and keyword-count

npm i --save puppeteer keyword-count
Enter fullscreen mode Exit fullscreen mode

Note: Don't panic if it takes ages to finish the installation. Puppeteer usally takes longer time to install

Folder structure

For reference and clarity purposes, this is how our project directory will look like at the end. We come to that and explain later. Don't mind the dev.md file you are seeing there, it is the file that contains what you are reading now, so technically not part of the project files ๐Ÿ˜†.

project-directory-img

Prepare the keyword files

We want to have both the keywords files stored in the assets directory in the root of our project directory. I have cleaned up these two files (positive and negative text files from the Github repo) to contain only the keywords because the original files from that repo contain acknowledgement notes which will require us to take extra step to clean them up.

Convert the text files to json files

Since we want to count the number of occurences of each keyword in the document body, I found an npm package that does this job extremely well - keyword-count. The package demands that we provide paths to three files:

{
    target: "/path/to/the/text/file/we/want/to/analyze", 
    keywordsList: "/path/to/json/file/containing/the/keywords", 
    outputPath: "/path/to/json/file/we/want/to/write/the/result/of/the/analysis"
}
Enter fullscreen mode Exit fullscreen mode

That is why in the assets directory structure above, you are seeing one million and one files there ๐Ÿ˜„. Let me explain what each file in that directory is doing.

  1. input.txt - This is the file containing the text of the document body we want to analyze. Visit any webpage, pop open devtools and type document.body.textContent in the console. The text it returns is what we want to analyze, and that is what goes to this file. We haven't created it yet but we'll come to that.

  2. negative.txt - This is the same file we got from the keywords text file but we have removed the acknowledgement note for easy parsing. We want to convert this file to a json file so that the keyword-count package can be able to use it. This leads us to the third file in that directory.

  3. negative.json - This is the json file that the keyword-count package expects to see the list of keywords to work with.

  4. negativeResult.json - The keyword-count package spits the result of its computation in this json file. That's why you are are seeing it here.

The same explanation goes for the remaining files (positive.txt, positive.json and positiveReslt.json).

Wait, do I have to manually create all these files myself? Nope! We are going to create them programatically from our code. You should only have two files there - positive.txt and negative.txt (I will include them in the project repo).

Now that we have a clear understanding of the assets directory, let's remind ourselves of what we want to achieve - Convert the text files to json files ( positive.txt ==> positive.json, same for negative ).

At the root project directory, open your terminal window again and type the following:

mkdir utils && cd utils && touch textToJson.js
Enter fullscreen mode Exit fullscreen mode

We created the utils directory and navigated into it and then created a textToJson.js file with that one-liner bash command. Open the textToJson.js file in your text editor of choice and paste in this block of code

const fs = require('fs')
const path = require('path')
const readline = require('readline')

async function processLine(filename) {    
    const fileStream = fs.createReadStream(path.join(__dirname, `./../assets/${filename}`))

    // This will contain the list of words in the text file
    let linesArray = []

    const rl = readline.createInterface({
        input: fileStream,
        crlfDelay: Infinity
    })

    // Iterate over each line and populate the `linesArray`
    for await (const line of rl) {
        linesArray.push(line)
    }

    // Initialize an empty object and populate it with the array of words
    let json = {}
    json["keywords"] = linesArray

    // Write the populated object to a json file on our filesystem
    try {
        await writeJSON(filename, json)
    } catch(err) {
        console.log(err)
    }
}
Enter fullscreen mode Exit fullscreen mode

First we are requiring three modules to work with and then creating the processLine() function. This function takes in a filename (think of the filename variable as the name of the .txt file we want to convert to json - positive.txt or negative.txt) and creates a readable stream off of that file on our filesystem. We then pass this readable stream to the readline to extract every word line by line in the file passed. For every word found in that file, we push the word to the linesArray variale. After the for...of iteration is done, by this time, we have an array containing all the keywords extracted from the text file. We want to save this keywords as a json file on our disk - in the assets directory, we then called the writeJSON() function, passing it the filename and the json data we want to write to the file.

function writeJSON(filename, json){

    // Rename the filename from .txt to .json extension
    filename = filename.split('.')[0] + '.json'

    const filePath = path.join(__dirname, `./../assets/${filename}`)

    const data = JSON.stringify(json)


    fs.writeFile(filePath, data, (err) => {
        if (err) {
            return Promise.reject(`Error generating ${filename}`)

            // Exit program at this point, because this file will be used by the scraper API
            process.exit(1)
        }

        console.log(`${filename} generated`)

        return Promise.resolve()
    })
}
Enter fullscreen mode Exit fullscreen mode

Remember, the filename argument passed to the writeJSON() function is just a string that will probably look like this: positive.txt or negative.txt. We then replaced the .txt extension to .json and append it to the full filepath. We also turned the json data to a string and call the standard writeFile method of the fs module.

Now whenever the processLine() gets called, it is going to generate an equivalent json file containing the keywords that the keyword-count package will use. E.g,

await processLine('positive.txt')
// It will generate a positive.json file in the assets directory

await processLine('negative.txt')
// It will generate a negative.json file in the assets directory
Enter fullscreen mode Exit fullscreen mode

Shameless plug: if you are still here with me then kudos! You may also want to checkout my site webscrapingzone.com where I teach web scraping indepth, by building real-life projects and potential ways you can monetize it. Get a 50% discount on the course ๐Ÿ˜„

At this point, we are done with the functionality of generating the json files for the keyword-count package to work with. Also, we are exporting the whole of this module in the textToJSON function. Next is to make request to the webpage we want to analyze.

Old-school Linux hackers, (ohh, I forgot to mention the Powershell and Steve's fans too ๐Ÿ˜† too), pop open your terminal and hit this one-liner again, creating the lib directory at the project's root, navigating inside and creating the scraper.js file.

mkdir lib && cd lib && touch scraper.js
Enter fullscreen mode Exit fullscreen mode

Open the scraper.js and paste this huge block of code

'use strict';

const puppeteer = require('puppeteer');
const fs = require('fs');
const path = require('path');

// Browser and page instance
async function instance(){
    const browser = await puppeteer.launch({
        headless: false
    })

    const page = await browser.newPage()
    return {page, browser}
}

// Extract all body text from the page
async function getBodyText(){
    const {page, browser} = await instance()

    // Get the url we want to visit from the user
    let baseURL = process.argv[2] ? process.argv[2] : "https://webscrapingzone.com"

    try {
        await page.goto(baseURL, {waitUntil: 'networkidle0'})
        await page.waitForSelector('body')

        let bodyText = await page.evaluate(() => {
            let scriptTags = document.querySelectorAll('script')
            let styleTags = document.querySelectorAll('style')

            // Remove a tag from the page
            function removeTagsFromPage(tags) {
                tags.forEach((tag) => {
                    tag.innerText = ""
                })
            }

            removeTagsFromPage(scriptTags)
            removeTagsFromPage(styleTags)

            // Get the page's text content
            let text = document.body.textContent

            // Remove line-break from text
            text = text.replace(/\n/g, "").trim()

            return text
        })

        await browser.close()

        return bodyText

    } catch (err) {

        // ***Handle errors properly in production environment***
        console.log(err)
    }
}
Enter fullscreen mode Exit fullscreen mode

Quite a bit happening there, but c'mon, it's not far beyond reach. Sip your drink one more time because we still have some journey across. That's our punishment for building the next billion-dollar product ๐Ÿ˜„.

Back from the digression, now let's explain what's happening in scraper.js. We created a instance() function, setup the browser and page objects from the puppeteer package and then returned them. The page object represents a blank browser page that we will use to make web requests.

We also created an async function called getBodyText(), as the name implies, we want to get all the text from the body tag of the page we want to analyze. Inside this function, we then made a request to the website we want to analyze, in our case here - webscrapingzone.com and then wait for the body tag to render before traversing the DOM.

The bodyText variable will contain all the text in the body tag of that page. But wait a second, including all the script and style tags? Allowing these two tags in our text we want to analyze will drop the accuracy rate of our program because they are codes and not actual text written by the author of that page. So we want to get rid of these two tags completely from the page.

The removeTagsFromPage() is a helper function that removes any tag from the page. Actually, we are not removing the tag, but setting the innerText property of the tag to an empty string. Example, open your devtools and paste the following block of code into your console and see what happens to the page. You just hacked yourself and saw a bright light staring at you ๐Ÿ˜†.

let bodyTags = document.querySelectorAll('body')

// Remove all tags from the page
function removeTagsFromPage(tags) {
    bodyTags.forEach((tag) => {
        tag.innerText = ""
    })
}

removeTagsFromPage(body Tags)
Enter fullscreen mode Exit fullscreen mode

That's the kind of behaviour we want, but this time not removing everything on the page, instead just the script and style tags. We want to remove them so that our algorithm doesn't analyze some random piece of gibberish. We then extracted the text left in the page by running document.body.textContent. The text may contain some formatting and so many line breaks, we removed the line-breaks and then trimmed the text. Now this is the text we want to run our analysis on. Remember the input.txt file? This text will then go into this file, but not so just yet.

Give me a stretch at this time because we will continue in the next post of this series. In our next post, we will run the actual analysis and determine if a page is worth our time or not. In this section we have achieved two things:

  • Creating functionality for generating keyword files

  • Creating functionality for extracting the text we want to run our analysis

Stay tunned for the next post, you can follow me on Twitter to get updates when it's published @microworlds

Motivation

If you have found this article helpful in any way and generosity is the state of your mind right now, you can put a smile on my face like this one here๐Ÿ˜„ with a cold bottle of anything right here below:

cold bottle of anything ๐Ÿ˜†

Gracias ๐Ÿ™

Top comments (0)