DEV Community

Riccardo Bernardini
Riccardo Bernardini

Posted on • Edited on

Proving the correctness of a binary search procedure with SPARK/Ada

Introduction

SPARK/Ada is a language derived from Ada that allows for a formal checking (i.e., mathematically prove the correctness) of the software. Several types of checks can be done: from the absence of runtime exceptions to no use of uninitialized variables, up to the formal proof that a given procedure/function fulfills its contract.

I like formal checking because it can actually prove that your program is correct (or that, at least, some kind of errors are absent), something that is usually not possible with testing. Of course, formal checking cannot applied to every program, but when it is possible it is a very powerful tool.

SPARK/Ada is definitively on my list of stuff that I want to learn.

Recently I had to write a procedure for a binary search in an ordered array. I thought that it could be an interesting exercise to write it in SPARK/Ada in order to have it formally verified. This is a brief summary of this experience, written with a tutorial spirit.

The requirements

The problem I want to solve is the following

  • INPUTS
    • Table: an array of Float sorted in strictly increasing order (that is, Table(n+1) > Table(n) for every n).
    • What : a Float such that
      • it is included between the array extremes, that is, Table(Table'First) ≤ What ≤ Table(Table'Last), but
      • it is not necessarily in Table, that is it is not required that there is n such that Table(n) = What
  • OUTPUTS
    • The unique index n such that
Table(n)  What < Table(n+1)
Enter fullscreen mode Exit fullscreen mode

The solution

The spec file

First basic draft of specs

Let's first flesh out the spec file (roughly [very roughly] similar to a *.h file for you C people).

pragma SPARK_Mode (On);

package Searching is
   subtype Element_Type is Float;
   subtype Index_Type is Natural;

   type Array_Type is 
      array (Index_Type range <>) of Element_Type;

   function Find (What  : Element_Type;
                  Table : Array_Type)
                  return Index_Type;
end Searching;
Enter fullscreen mode Exit fullscreen mode

Entering SPARK Mode

The first line we encounter is

pragma SPARK_Mode (On);
Enter fullscreen mode Exit fullscreen mode

This claims that this package will be compatible with SPARK restrictions and conventions. The lines

   subtype Element_Type is Float;
   subtype Index_Type is Natural;
Enter fullscreen mode Exit fullscreen mode

define Element_Type and Index_Type as synominous of Float and Index_Type, respectively. This is not strictly necessary, but it can make it easier to change the types in a future

Function declaration

 function Find (What  : Element_Type;
                Table : Array_Type)
                return Index_Type;
Enter fullscreen mode Exit fullscreen mode

should be clear enough.

Introducing contracts

In order for SPARK to be able to proof that our implementation of Find is correct, we need to describe to SPARK what we expect Find to do. This is done by means of a contract. Like a normal contract between people, a function contract usually has two parts: preconditions and postconditions.

The idea is that if you (the caller) do your part (i.e. you meet the preconditions when you call me), then I, the function, promise to do my part, that is, that the result will satisfy the post-conditions.

If a contract is given, I can ask SPARK to prove that the post-conditions follow from the pre-conditions. If SPARK succeeds, I know that the code I wrote is correct (in the sense that it respects the contract) without doing any test: I have a mathematical proof for it.

BTW, contracts are very useful even if you are not using SPARK. First, they are a wonderful "bug trap." By using the right options, you can ask the compiler to insert code that checks the pre-conditions when the function is called and the post-conditions when the function ends. If pre/post-conditions are not met, an exception is raised.

Moreover, contracts document in a formal and unambiguous way the behavior of the function and, differently from usual comment-based documentation, cannot go out of sync with the code.

OK, so contracts are cool. How do we write the contract for our function? Well, let's start with the precondition and let's check the specs. It is said that (i) Table must be sorted and (ii) What must be between Table extrema; we just translate that in Ada in this way

    function Find (What  : Element_Type;
                  Table : Array_Type)
                  return Index_Type
     with
       Pre =>
          Is_Sorted (Table)
          and Table (Table'Last) >= What
          and What >= Table (Table'First);
Enter fullscreen mode Exit fullscreen mode

where Is_Sorted is a function that checks if its argument is sorted and defined as follows

function Is_Sorted (Table : Array_Type) return Boolean
   is (for all L in Table'Range =>
         (for all M in Table'Range =>
            (if L > M then Table (L) > Table (M))))
   with Ghost;
Enter fullscreen mode Exit fullscreen mode

The body of the function (this form is called expression function) is the translation in Ada of the definition of monotonic array.

Note the with Ghost in the definition. This says that Is_Sorted is a ghost function, that is, a function that can be used only in contracts or assertions; if used in other places ("real code") an error is raised. (I love this kind of protections ♥)

The preconditions look right and they represent the actual specs, but if we try to run SPARK we get an error

medium: array index check might fail

at line

      and What >= Table (Table'First);
Enter fullscreen mode Exit fullscreen mode

This means that Table'First, that is the first index of the array, can be ... outside array bounds? The first index is by definition within the bounds, right?

Perplexed woman
Go home SPARK, you're drunk...

Well... Actually, SPARK is right. If you ask for a counterexample you get

e.g. when Table'First=1 and Table'Last=0
Enter fullscreen mode Exit fullscreen mode

Now, when in the world can be possible that the last index is smaller than the first one?!? Well, if Table is empty... Empty arrays in Ada have the last index smaller than the first one. Therefore, trying to access Table (Table'First) would cause an error.
Well, SPARK, good catch...

Old man asking why someone would want to search an empty table

Well, I agree (although it could happen because of an error), but SPARK does not know it. To make SPARK happy it suffices to add Table'Length > 0 to the precondition to get

    function Find (What  : Element_Type;
                  Table : Array_Type)
                  return Index_Type
     with
       Pre => Table'Length > 0
              and then (Is_Sorted (Table)
                        and Table (Table'Last) >= What
                        and What >= Table (Table'First));
Enter fullscreen mode Exit fullscreen mode

Now SPARK is happy and even the casual user sees that you cannot call the function with an empty table.

The postcondition

Also for the post-conditions we translate directly the requirement from English to Ada. It is required that What is between Table(n) and Table(n+1) where n is the value returned by the function. In Ada we get

         (if Find'Result = Table'Last then
             Table (Find'Result) = What
          else
             Table (Find'Result) <= What 
         and What < Table (Find'Result + 1));
Enter fullscreen mode Exit fullscreen mode

Note that Find'Result is the value returned by Find and that we consider as special case Find'Result = Table'Last since in this case there is no "following entry" in Table. Overall, the function declaration with the full contract is

   function Find (What  : Element_Type;
                  Table : Array_Type)
                  return Index_Type
     with
       Pre => 
          Table'Length > 0
          and then (Is_Sorted (Table)
                    and Table (Table'Last) >= What
                    and What >= Table (Table'First)),
       Post =>
         (if Find'Result = Table'Last then
             Table (Find'Result) = What
          else
             Table (Find'Result) <= What 
         and What < Table (Find'Result + 1));
Enter fullscreen mode Exit fullscreen mode

The body file (implementation)

The algorithm

The algorithm for a binary search is well known and exemplified in the following picture

Example of binary search over a length 8 array

Basically, we keep two "cursors" in the table: Bottom and Top with the condition that it must always be

Table(Bottom)  What < Top(top)
Enter fullscreen mode Exit fullscreen mode

We get the Middle point between Top and Bottom and if Table(Middle) is too large we move Top to Middle, otherwise we move Bottom. We iterate this until on of the following two conditions holds

  • Table(Bottom) = What, that is, we actually found What in Table
  • Top = Bottom+1 there are no intermediate entries between Top and Bottom

In both cases we return Bottom

The actual code

Let's start with a basic skeleton of the procedure.

function Find (What : Element_Type; Table : Array_Type) return Index_Type
   is
      Bottom : Index_Type;
      Top    : Index_Type;
      Middle : Index_Type;
   begin
      if Table (Table'Last) = What then
         return Table'Last;
      end if;

      Bottom := Table'First;
      Top    := Table'Last;

      pragma Assert (Table (Top) > What and What >= Table(Bottom));

      while Table (Bottom) < What and Top - Bottom > 1 loop
         Middle := (Bottom + Top)/2;

         if Table (Middle) > What then
            Top := Middle;
         else
            Bottom := Middle;
         end if;
      end loop;

      return Bottom;
   end Find;

Enter fullscreen mode Exit fullscreen mode

It is just a translation of the algorithm informally described above. Note how the special case Table (Table'Last) = What is handled separately; in this way we know that

Table (Top) > What and What >= Table(Bottom)
Enter fullscreen mode Exit fullscreen mode

holds (see the pragma Assert).

Now, in order to make it easier for SPARK to prove the correctness of the code we insert in the code some pragma Assert claiming properties that hold true in different points of the code.

Automatic theorem proving is not easy and some hint to the prover can help. Moreover, I love spreading generously my code with assertion since they help understanding what the code does and which properties I expect to be true. They are also formidable "bug traps".

The function body with all the assertions looks like

function Find (What : Element_Type; Table : Array_Type) return Index_Type
   is
      Bottom : Index_Type;
      Top    : Index_Type;
      Middle : Index_Type;
   begin
      if Table (Table'Last) = What then
         return Table'Last;
      end if;

      pragma Assert (Table (Table'Last) > What);

      Bottom := Table'First;
      Top    := Table'Last;

      pragma Assert (Bottom < Top);
      pragma Assert (Table (Bottom) <= What and What < Table (Top));

      while Table (Bottom) < What and Top - Bottom > 1 loop

         pragma Loop_Invariant (Bottom >= Table'First);
         pragma Loop_Invariant (Top <= Table'Last);
         pragma Loop_Invariant (Top > Bottom);
         pragma Loop_Invariant (Table (Bottom) <= What and What < Table (Top));
         pragma Loop_Variant (Decreases => Top - Bottom);

         Middle := (Bottom + Top)/2;
         pragma Assert (Bottom < Middle and Middle < Top);

         if Table (Middle) > What then
            Top := Middle;
         else
            Bottom := Middle;
         end if;
      end loop;

      pragma Assert (Table (Bottom) <= What and Table (Bottom + 1) > What);
      return Bottom;
   end Find;

Enter fullscreen mode Exit fullscreen mode

There are just two points worth describing; the first is this sequence of pragmas inside the loop

pragma Loop_Invariant (Bottom >= Table'First);
pragma Loop_Invariant (Top <= Table'Last);
pragma Loop_Invariant (Top > Bottom);
pragma Loop_Invariant (Table (Bottom) <= What 
                       and What < Table (Top));
pragma Loop_Variant (Decreases => Top - Bottom);

Enter fullscreen mode Exit fullscreen mode

pragmas Loop_Invariant and Loop_Variant are specific to SPARK. A loop invariant is a condition that is true at every iteration and you can see that this loop invariant is a formalization of what we said before: at every iteration What is between Top and Bottom. Loop invariants are important in the proof of correctness of while loops.

A while loop can potentially go on forever; a technique that allows us to prove that the loop will terminate is to search for some value that always increases (or decreases) at every iteration; if we know a bound for this value (e.g., it is always positive and it always decreases) we can deduce that the loop will terminate. The pragma Loop_Variant allows us to declare said value. In this case the distance between Top and Bottom is halved at every iteration, therefore it is a good variant. Since Top-Bottom cannot be smaller than 2 (see condition in the while), we deduce that the loop will terminate.

A second observation is about seemly innocuous line

 Middle := (Top + Bottom) / 2;
Enter fullscreen mode Exit fullscreen mode

Here SPARK complains with

medium: overflow check might fail 
(e.g. when Bottom = Index_Type'Last-4 and Top = Index_Type'Last-2)
Enter fullscreen mode Exit fullscreen mode

Good catch! Here SPARK is observing that although theoretically Middle should be in the range of representable integers if Top and Bottom are, there is a possibility of an overflow while doing the sum. Since on my PC Index_Type'Last = 2^63-1, it is unlikely that one would work with tables so big, nevertheless...

We have two solutions: (i) allow a smaller range of integers (that is, up to Index_Type'Last/2) or (ii) compute the mean with function

function Mean (Lo, Hi : Index_Type) return Index_Type
is (Lo + (Hi - Lo) / 2)
   with
     Pre  => Lo < Index_Type'Last and then Hi > Lo + 1,
     Post => Hi > Mean'Result and Mean'Result > Lo;
Enter fullscreen mode Exit fullscreen mode

that is guaranteed to have no overflow. Note that in the precondition we require that Hi > Lo + 1, this is guaranteed by the loop condition and it is necessary in order to guarantee that the post conditions hold which in turn guarantees that the loop variant decreases at every iteration.

Finally...

OK, now if we run SPARK we get

Summary of SPARK analysis
=========================

-------------------------------------------------------------------------------------------------------
SPARK Analysis results        Total      Flow   Interval   CodePeer      Provers   Justified   Unproved
-------------------------------------------------------------------------------------------------------
Data Dependencies                 .         .          .          .            .           .          .
Flow Dependencies                 .         .          .          .            .           .          .
Initialization                    3         3          .          .            .           .          .
Non-Aliasing                      .         .          .          .            .           .          .
Run-time Checks                  29         .          .          .    29 (CVC4)           .          .
Assertions                       14         .          .          .    14 (CVC4)           .          .
Functional Contracts              3         .          .          .     3 (CVC4)           .          .
LSP Verification                  .         .          .          .            .           .          .
-------------------------------------------------------------------------------------------------------
Total                            49    3 (6%)          .          .     46 (94%)           .          .

Enter fullscreen mode Exit fullscreen mode

Do you see on the extreme right the column Unproved with no entries? That is what I want to see... SPARK was able to prove everything, so now you can kick back, relax and enjoy your binary search function with confidence: you made terra bruciata (scorched earth) around it and no bug can survive.

Castle with flag labelled

Top comments (0)