Do you have a RPI4 running Raspbian on 32 or 64 bits?
You can use this bash to setup a fresh raspbian image and enable SSH connection through your iPad Pro USB C connector in a breeezz
Run this code on a Raspberry Pi connected to the Internet.
sudo curl -sSL ipad.eppr.link | sh
Shutdown your Pi after finish.
Take out your SD card and:
Create an empty file named “ssh” on your boot folder
And edit 2 other files on your boot folder
Add dtoverlay=dwc2 to the /boot/config.txt
Add modules-load=dwc2 to the end of /boot/cmdline.txt
Get the sd back inside again and...
Connect your pi to your iPad Pro using a USB C 2.0 Cable (!important;)
Wait 30 seconds and look inside Settings App on your iPad.
A new Ethernet USB adapter should pop in sight.
SSH into your Pi using a local ip 10.55.0.1 and your favorite password
ssh pi@10.55.0.1
If you want to know more cool stuff HMU, and if you want show appreciation follow our socials:
(Cmd+C Cmd+V this on your browser)
-EPPR
https://eppr.link
(Disclaimer: Remember to ALWAYS wash you hands and read the bash inside your sudos)
Top comments (0)