Creating an Azure virtual network (VNet) with four subnets using the address space 192.148.30.0/26 several steps in the Azure portal. Below is a step-by-step guide with screenshots to help you through the process:
Step 1: Sign in to Azure Portal
- Open your web browser and navigate to the Azure Portal.
- Sign in with your Azure account credentials.
Step 2: Create a Resource Group (if needed)
If you do not already have a resource group where you want to create the virtual network, you can create one:
- In the Azure portal, click on Resource groups in the left-hand menu.
- Click + Add to create a new resource group.
- Fill in the required details (Subscription, Resource group name, Region), and click Review + create and then Create.
Step 3: Create a Virtual Network
Now, let's create the virtual network with the specified address space and subnets:
- In the Azure portal, click on Virtual networks from the home page, then click + Create.
- Fill in the required details:
- Subscription: Choose your Azure subscription.
- Resource group: Select the resource group you created or want to use.
- Name: Enter a name for your virtual network.
- Region: Choose the Azure region where you want to deploy the virtual network.
-
IPv4 address space: Enter
192.148.30.0/26
for the address space.The image below shows that we can have 64 addresses within this network.
Step 4: Configure Subnets
Now, let's configure the four subnets within the virtual network:
- Under Subnets, click + Add subnet.
- Configure each subnet as follows:
- Subnet Name: Enter a name for the subnet (e.g., Subnet-1, Subnet-2, etc.).
Subnet Address range: Specify the subnet range within the virtual network address space (
192.148.30.0/26
). Ensure each subnet range is within the/26
address space (192.148.30.0
to192.148.30.63
)Click Add for each subnet after configuring its details
For Subnet-1:
192.148.30.0/28
-192.148.30.15/28
For Subnet-2:
192.148.30.16/28
-192.148.30.31/28
For Subnet-3:
192.148.30.32/28
-192.148.30.47/28
For Subnet-4:
192.148.30.48/28
-192.148.30.63/28
- Once all four subnets are added, click Review + create.
Step 5: Review and Create
- Review the details of your virtual network configuration.
- Click Create to deploy the virtual network and its subnets.
Step 6: Deployment Progress
Wait for Azure to deploy the virtual network and subnets. This process usually takes a few minutes.
Step 7: Verification
- Once deployment is complete, click on Go to resources.
- Navigate to Settings,click on subnets
Congratulations! You have successfully created an Azure virtual network with four subnets using the address space 192.148.30.0/26
.
Top comments (0)