Valeria

Posted on Jan 6, 2022 • Edited on Feb 5, 2022

Introduction to HTTP & REST API

#webdev #beginners #go #tutorial

In the previous article we've built a tiny HTTP server that was saying "I AM GROOT" in huge bold letters.

But what was actually happening under the hood?

HTTP: HyperText Transfer Protocol

As the name suggests, it is a protocol to transfer text. I'll tell you more: it's a text-based protocol. Take a look at that:

HTTP/1.1 200 OK
Date: Thu, 06 Jan 2022 07:45:04 GMT
Content-Length: 39
Content-Type: text/html; charset=utf-8

<html><body><h1>I AM GROOT!</h1></html>

That is a HTTP response sent by the web server from the previous article. If you remember, we have only wrote the last part of it - the response body; the header was added by the net/http package:

HTTP/1.1 is the name and version of the protocol
200 OK is the code for "OK", as you've probably guessed, it could've been 404 NOT FOUND or 500 INTERNAL SERVER ERROR🙀 or any other HTTP Response status codes
Date,Content-Length and Content-Type as the response headers

But don't trust me on this one! Ask curl instead!

Curl is a small command-line tool that's "transferring data with URLs since 1998". Chances are you already have it installed on your machine, so just give it a try in your terminal and, if it doesn't work, go and grab it from here:

curl --version

The commands that I use the most are curl <url>, which just prints the response body to a terminal, and curl <url> -I, which prints only the headers.

To see the raw HTTP response, similar to the one I showed you, start the server from the previous article and type in your terminal:

curl -D - http://localhost:8080

Congratulations, you can now read raw HTTP! You don't need to, you have a browser for it, but you can 😏

But there's the other side to it - if you can read responses, there must be a way to write requests, right?

Right! It looks very similar to the responses, why wouldn't it:

GET / HTTP/1.1
Host: localhost
User-Agent: curl/7.54.0
Accept: */*

This request doesn't have any body, that's why it ends with two empty lines or, to be precise, two CRLF: Carriage Return and Line Feed \r\n sequences.

The first line starts with a HTTP Method GET and a path / and ends with a familiar protocol version.

And, similar to a response, request headers come next.

In this case we are intending to get a response from the root path, and therefore performing a GET / request with no body, but we could also try to post something:

POST /some/other/path HTTP/1.1
Host: localhost
User-Agent: curl/7.54.0
Accept: */*
Content-Length: 6

Hello!

Want to try it yourself? Save the request to a file, e.g. raw.txt and type this in the terminal:

nc localhost 8080 < raw.txt

If you are on Windows and this command is not recognised, install NetCat as suggested here.

You've probably noticed, that the web server we've built responds with the exact same thing, no matter what requests we are making. Let's fix that!

RESTful API

We would like to differentiate between request methods (GET,POST,PUT,DELETE etc) and between the paths (/,/items,/item/1 etc). And, a top of that, wouldn't it be nice for paths and verbs to make sense together? It's easy to guess what POST /image and DELETE /user/1 do and predict other paths. Congratulations, we've re-invented REST API!

Now let's implement it. That's where we left off the last time:

//main.go
package main

import (
    "log"
    "net/http"
)

func main() {
    address := "localhost:8080"
    log.Printf("Server is listening on: http://%v", address)
    http.HandleFunc("/", HomePage)
    err := http.ListenAndServe(address, nil)
    if err != nil {
        log.Fatal(err)
    }
}

func HomePage(w http.ResponseWriter, req *http.Request) {
    w.Write(([]byte)(`<html><body><h1>I AM GROOT!</h1></html>`))
}

Our home page screams I AM GROOT, so how about we add a way to POST /greeting?

Add a new function after HomePage:

func GreetingPage(w http.ResponseWriter, req *http.Request) {
    name := "USER"
    html := fmt.Sprintf(`<html><body><h1>HELLO, %v! I AM GROOT!</h1></html>`, name)
    w.Write(([]byte)(html))
}

For now, we've hard-coded the name as USER and added it to the page content using fmt.Sprintf. We've done same as before with the log.Printf, except this time we did not need to print the resulting string in the terminal, just to get the string itself.

VSCode should automatically add packages you are using to the list of imports, but do check that fmt was indeed added there.

Let's add one more handler to the main function:

func main() {
    address := "localhost:8080"
    log.Printf("Server is listening on: http://%v", address)
    http.HandleFunc("/", HomePage)
    http.HandleFunc("/greeting", GreetingPage) // <- Add this line
    err := http.ListenAndServe(address, nil)
    if err != nil {
        log.Fatal(err)
    }
}

Now, if you navigate to http://localhost:8080/greeting, you'll see:

And, if you come back to http://localhost:8080/, the content will be the same as before.

Not bad! We've got ourselves a multi-page website 😎

Let's make the server say I AM GROOT? in response to GET /greeting and answer with HELLO, <name>! I AM GROOT! (in extended groot language) every time someone sends a POST /greeting with the name as a request body (in plain text).

If you've dared to try the bonus challenge from the previous article, you are already familiar with test-driven development. It's okay if you haven't, you will be now 😏

Go comes with a bunch of useful tools to check go vet, format go fmt and test go test, to name a few. The latter is the test runner, as you've probably figured.

Create a file called main_test.go by the side of main.go:

package main

import (
    "fmt"
    "io/ioutil"
    "net/http"
    "net/http/httptest"
    "strings"
    "testing"
)

func TestGetGreeting(t *testing.T) {
    req := httptest.NewRequest(http.MethodGet, "/greeting", nil)
    w := httptest.NewRecorder()
    GreetingPage(w, req)
    res := w.Result()
    defer res.Body.Close()
    got, err := ioutil.ReadAll(res.Body)
    if err != nil {
        t.Fatal(err)
    }
    expected := "<h1>I AM GROOT?</h1>"
    if !strings.Contains(string(got), expected) {
        t.Errorf("Expected to find %q in %q", expected, got)
    }
}

func TestPostGreeting(t *testing.T) {
    name := "YOUR NAME"
    req := httptest.NewRequest(http.MethodPost, "/greeting", strings.NewReader(name))
    w := httptest.NewRecorder()
    GreetingPage(w, req)
    res := w.Result()
    defer res.Body.Close()
    got, err := ioutil.ReadAll(res.Body)
    if err != nil {
        t.Fatal(err)
    }
    expected := fmt.Sprintf("HELLO, %v!", name)
    if !strings.Contains(string(got), expected) {
        t.Errorf("Expected to find %q in %q", expected, got)
    }
}

Every function that starts with a Test in a test file will be executed when we run go test .:

--- FAIL: TestGetGreeting (0.00s)
    main_test.go:24: Expected to find "<h1>I AM GROOT?</h1>" in "<html><body><h1>HELLO, USER! I AM GROOT!</h1></html>"
--- FAIL: TestPostGreeting (0.00s)
    main_test.go:41: Expected to find "HELLO, YOUR NAME!" in "<html><body><h1>HELLO, USER! I AM GROOT!</h1></html>"
FAIL
FAIL    web-server      0.010s
FAIL

As expected, both of the tests are failing and we'll make them pass in no time, but first, let me walk you though what you just wrote 🤗

Both functions are very similar, in each one of them we are using net/http/httptest package to mock a request to a server. The function GreetingPage expects a certain type of arguments and, if we pass arguments that do not meet the requirements, the program won't compile.

So what are the requirements? In Go it's called an interface. An interface dictates that whatever your entity is it must have certain methods implemented. For example http.ResponseWriter, comments aside, looks like this:

type ResponseWriter interface {
    Header() Header
    Write([]byte) (int, error)
    WriteHeader(statusCode int)
}

And httptest.ResponseRecorder is a struct that has these methods wired to store results in memory:

type ResponseRecorder struct {
    Code int
    HeaderMap http.Header
    Body *bytes.Buffer
    Flushed bool
    result      *http.Response 
    snapHeader  http.Header 
    wroteHeader bool
}

func (rw *ResponseRecorder) Header() http.Header {
    m := rw.HeaderMap
    if m == nil {
        m = make(http.Header)
        rw.HeaderMap = m
    }
    return m
}

Once again I've stripped the comments for brevity, but I do recommend you to cmd+click (Mac) or ctrl+click in your code editor on the names of these methods and take a look at the source code for yourself.

So, we are creating couple of structures that has methods required for request and response arguments:

req := httptest.NewRequest(http.MethodGet, "/greeting", nil)
w := httptest.NewRecorder()

In the TestGetGreeting we, erm, test GET /greeting without the body, so we pass http.MethodGet(it's a constant "GET"), path /greeting and nil for body.

In the TestPostGreeting we change the method to http.MethodPost (constant "POST") and pass a body:

name := "YOUR NAME"
req := httptest.NewRequest(http.MethodPost, "/greeting", strings.NewReader(name))
w := httptest.NewRecorder()

Requests, just like responses, can be quite long (a two hour Netflix movie in 4K would weight around 11.4 GB) and that wouldn't fit into one package. You see, while HTTP is just a text, it is still being carried between you and the server wrapped in small binary packages (up to 64k bytes tops).

On a lower lever, every time you type https://www.google.com/in your browser here's what's going on:

Your browser is looking up the IP address for www.google.com, you could mimic it with:

nslookup www.google.com
Server:     192.168.1.1
Address:    192.168.1.1#53

Non-authoritative answer:
Name:   www.google.com
Address: 142.250.74.4

Your browser initiates a TCP connection with that address
If the requested protocol is HTTPS, it would initiate a secure connection and everything that you send will be encrypted so that only the server could make sense of your request
With the open TPC connection, the client (browser) will start packing your HTTP Request and sending over to the server
The server will start sending response packages
The client will unpack & decrypt the response
And, when done, close the connection

With that in mind, you'll probably understand why you can't just pass a string to the httptest.NewRequest and instead create a reader from strings package, that allows reading byte slices instead:

strings.NewReader(name)

And these lines also start to make sense, right? We need to be able to tell when the whole request body is sent and wait till the whole response body is received to be able to do something with it:

GreetingPage(w, req)
res := w.Result()
defer res.Body.Close()
got, err := ioutil.ReadAll(res.Body)

The defer keyword means "do it when you're done with the rest", or in technical terms, delays the operation till the surrounding function returns. I prefer to read it as "don't forget to", so, in this case, we use it to eventually close the request body:

defer res.Body.Close()

We could write this line anywhere after the res variable is defined, it'll work just the same. Very handy when you deal with async operations!

Next, we are reading all the parts of the body with ReadAll from package ioutil:

got, err := ioutil.ReadAll(res.Body)

And if something went wrong, for example the connection got lost, we'll stop the test with:

if err != nil {
  t.Fatal(err)
}

Where the t is the argument of the test function:

func TestPostGreeting(t *testing.T) {
//...
}

See the * in front of the type? Yup, it's a pointer again. In most cases Go allows you treat them as common variables, so we wouldn't guess if it's a pointer or not from just looking at the body of the function. We'll be using pointers over and over throughout the series, but if you want to dig deeper right now - take a look at the gobyexample.com/pointers.

And finally, once we are done with all the preparations, we check if the response we received matches the one we expected and fail the test if it doesn't:

expected := fmt.Sprintf("HELLO, %v!", name)
if !strings.Contains(string(got), expected) {
    t.Errorf("Expected to find %q in %q", expected, got)
}

We could compare the exact values, but it's a good idea to check only for the part you are interested in, so that when you decide to add a <title>Groot Server</title> the tests won't start failing.

Phew! You've made it here! Great job! Even if the tests are still failing...

They say "it's hard while learning, easier when fighting", same goes for the tests: writing the actual implementation is often easier than writing a test. But it doesn't mean you shouldn't! Quite the opposite, as your project grows more and more, you'll often change your code, yet the tests will stay the same - guarding your project from making the same mistakes over and over again.

I hope you'll adapt and preach TDD (test driven development) too 😇 Now let's make the tests pass!

Change the GreetingPage to:

func GreetingPage(w http.ResponseWriter, req *http.Request) {

    var html string
    switch req.Method {
    case http.MethodHead:
        {
            w.WriteHeader(http.StatusOK)
        }
    case http.MethodGet:
        {
            html = `<html><body><h1>I AM GROOT?</h1></html>`
        }
    case http.MethodPost:
        {
            name, err := ioutil.ReadAll(req.Body)
            if err != nil {
                log.Println("Error /greeting", err)
                w.WriteHeader(http.StatusInternalServerError)
                return
            }
            html = fmt.Sprintf(`<html><body><h1>HELLO, %s! I AM GROOT!</h1></html>`, name)
        }
    default:
        {
        w.Header().Set("Allow", "GET,POST,HEAD")     
w.WriteHeader(http.StatusMethodNotAllowed)

        }
    }

    w.Write(([]byte)(html))
}

And, voilà:

go test .
ok      web-server      0.009s

We can be certain it works in the browser and curl too, as the packages we used are also well tested, but never hurts to check:

curl -X POST -d "Me" http://localhost:8080/greeting

Will yield:

<html><body><h1>HELLO, Me! I AM GROOT!</h1></html>

And the GET /greeting, that the browser performs when you load a page will result in:

And if we try a different request, let's say a DELETE /greeting:

curl -X DELETE http://localhost:8080/greeting -I

We'll get:

HTTP/1.1 405 Method Not Allowed
Allow: GET,POST,HEAD
Date: Thu, 06 Jan 2022 10:45:36 GMT
Content-Length: 0

By now, you've probably figured how it works, but, just in case, let's go over what we've just implemented.

First, we've replaced hard-coded name with a data from the request:

name, err := ioutil.ReadAll(req.Body)

Then, we handled errors like a pro, by logging the error and responding with an 500 Internal Server Error code:

if err != nil {
                log.Println("Error /greeting", err)
                w.WriteHeader(http.StatusInternalServerError)
                return
            }

Then, because our name variable is no longer a string, we changed the format to explicit string conversion %s instead of %v, which otherwise would write something like HELLO, [10, 20,...]:

html = fmt.Sprintf(`<html><body><h1>HELLO, %s! I AM GROOT!</h1></html>`, name)

And we wrapped it all with a switch, branching our responses based on the request method:

var html string

switch req.Method {
  case http.MethodHead:{/**/}
  case http.MethodGet:{/**/}
  case http.MethodPost:{/**/}
  default:{/**/}
}

w.Write(([]byte)(html))

We've handled HEAD, GET and POST methods and the default case handled all the other, stating that the method was not allowed and providing available options as a comma-separated list in Allow header, like this:

HTTP/1.1 405 Method Not Allowed
Allow: GET,POST,HEAD
Date: Thu, 06 Jan 2022 11:02:14 GMT
Content-Length: 0

But we didn't set html variable to anything, why did it not crash? Well, that's one of the things I like about Go - most variables are defined with empty values. In case of string it's a "" and for a number it'd be a 0. This works for struct too:

package main

import (
    "fmt"
)

type Counter struct {
    count int
}

func main() {
    var c Counter
    fmt.Println(c.count)
    c.count++
    fmt.Println(c.count)
}
// Prints:
// 0
// 1

And you've already met nil. That's a starting value for pointers, slices, maps, channels, interfaces and function variables. And therefore this won't work:

func main() {
    var c *Counter
    fmt.Println(c.count)
    c.count++
    fmt.Println(c.count)
}
// panic: runtime error: invalid memory address or nil pointer dereference

Unless you give the pointer something to point at:

func main() {
    var c *Counter = &Counter{}
    fmt.Println(c.count)
    c.count++
    fmt.Println(c.count)
}

As you've guessed, & is used when you need to get the pointer from the variable: &Counter{} creates a new counter and returns its memory address.

And we're done for today! Yay you! 🥳

Bonus Challenge

Ready for more? Nice!

Here's the challenge for today:

Add one more endpoint /google
Make this endpoint redirect users to https://www.google.com/
Start it with a unit test

Till next time! And good luck!

DEV Community

Introduction to HTTP & REST API

HTTP: HyperText Transfer Protocol

RESTful API

Bonus Challenge

Top comments (0)

Read next

Building Composable Platforms with Harmony

👀 How Check Memory Leaks in React?⚠️🚨🚨

10 Cool Ideas for Discord Bots You Can Build Today

Why Offshore Laravel Development in Vietnam is a Smart Choice for Your Business