Buying an AC is a guessing game.
You buy one too small, and it runs all day without cooling the room. You buy one too big, and it cycles on and off, leaving the room humid and wasting energy.
Let's look at how to automate the BTU calculation using JavaScript.
The Math (Step-by-Step)
-
Calculate the Base BTUs:
Square Footage Γ 20 = Base BTUs - Adjust for Sunlight: If the room gets full sun, add 10%. If heavily shaded, subtract 10%.
- Adjust for Occupants: Add 600 BTUs for every person beyond the first two.
- Adjust for Kitchens: If it's a kitchen, add 4,000 BTUs.
The JavaScript Solution
Here is how you write a function to do this automatically:
function calculateACBTUs(lengthFt, widthFt, sunLevel, occupants, isKitchen) {
// 1. Base BTUs (20 BTUs per sq ft)
const squareFeet = lengthFt * widthFt;
let baseBTUs = squareFeet * 20;
// 2. Sunlight adjustment
if (sunLevel === 'full') baseBTUs *= 1.10; // Add 10%
if (sunLevel === 'shaded') baseBTUs *= 0.90; // Subtract 10%
// 3. Occupants adjustment (600 BTUs per extra person)
if (occupants > 2) {
baseBTUs += (occupants - 2) * 600;
}
// 4. Kitchen adjustment
if (isKitchen) baseBTUs += 4000;
// Round to nearest 1,000 for standard AC sizes
return Math.ceil(baseBTUs / 1000) * 1000;
}
// Example: 15x20 room, full sun, 3 occupants, not a kitchen
const btus = calculateACBTUs(15, 20, 'full', 3, false);
console.log(`You need roughly ${btus} BTUs.`);
// Output: You need roughly 7000 BTUs.
Common Gotchas
- Oversizing: Do not buy a 12,000 BTU unit for a 200 sq ft bedroom. It will short-cycle (turn on and off rapidly), which wastes energy and doesn't dehumidify properly.
- Ceiling Height: This script assumes an 8-foot ceiling. If your ceiling is 10 feet, there's 25% more air to cool. You must calculate volume (Length Γ Width Γ Height) instead of just area.
- Portable ACs: Portable units are less efficient than window units. You may need to bump up the BTUs slightly if you choose a portable unit.
The Visual Way
Calculating the base BTUs and then trying to figure out percentage adjustments for sunlight, plus adding BTUs for kitchen appliances, can get tedious.
If you want to determine the exact cooling capacity needed based on room square footage, sun exposure, ceiling height, and kitchen proximity, I built a free Room Air Conditioner BTU Calculator.
100% client-side. Nothing uploaded.
Have you ever bought an AC that was too big or too small? Let me know in the comments.
Top comments (0)