Introduction
Welcome to How to Write Tests. This lab is a part of the Rust Book. You can practice your Rust skills in LabEx.
In this lab, we will learn about writing tests in Rust using attributes, macros, and assertions.
How to Write Tests
Tests are Rust functions that verify that the non-test code is functioning in the expected manner. The bodies of test functions typically perform these three actions:
- Set up any needed data or state.
- Run the code you want to test.
- Assert that the results are what you expect.
Let's look at the features Rust provides specifically for writing tests that take these actions, which include the test
attribute, a few macros, and the should_panic
attribute.
The Anatomy of a Test Function
At its simplest, a test in Rust is a function that's annotated with the test
attribute. Attributes are metadata about pieces of Rust code; one example is the derive
attribute we used with structs in Chapter 5. To change a function into a test function, add #[test]
on the line before fn
. When you run your tests with the cargo test
command, Rust builds a test runner binary that runs the annotated functions and reports on whether each test function passes or fails.
Whenever we make a new library project with Cargo, a test module with a test function in it is automatically generated for us. This module gives you a template for writing your tests so you don't have to look up the exact structure and syntax every time you start a new project. You can add as many additional test functions and as many test modules as you want!
We'll explore some aspects of how tests work by experimenting with the template test before we actually test any code. Then we'll write some real-world tests that call some code that we've written and assert that its behavior is correct.
Let's create a new library project called adder
that will add two numbers:
$ cargo new adder --lib
Created library $(adder) project
$ cd adder
The contents of the src/lib.rs
file in your adder
library should look like Listing 11-1.
Filename: src/lib.rs
#[cfg(test)]
mod tests {
1 #[test]
fn it_works() {
let result = 2 + 2;
2 assert_eq!(result, 4);
}
}
Listing 11-1: The test module and function generated automatically by cargo new
For now, let's ignore the top two lines and focus on the function. Note the #[test]
annotation [1]: this attribute indicates this is a test function, so the test runner knows to treat this function as a test. We might also have non-test functions in the tests
module to help set up common scenarios or perform common operations, so we always need to indicate which functions are tests.
The example function body uses the assert_eq!
macro [2] to assert that result
, which contains the result of adding 2 and 2, equals 4. This assertion serves as an example of the format for a typical test. Let's run it to see that this test passes.
The cargo test
command runs all tests in our project, as shown in Listing 11-2.
$ cargo test
Compiling adder v0.1.0 (file:///projects/adder)
Finished test [unoptimized + debuginfo] target(s) in 0.57s
Running unittests src/lib.rs (target/debug/deps/adder-
92948b65e88960b4)
1 running 1 test
2 test tests::it_works ... ok
3 test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s
4 Doc-tests adder
running 0 tests
test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s
Listing 11-2: The output from running the automatically generated test
Cargo compiled and ran the test. We see the line running 1 test
[1]. The next line shows the name of the generated test function, called it_works
, and that the result of running that test is ok
[2]. The overall summary test result: ok.
[3] means that all the tests passed, and the portion that reads 1 passed; 0 failed
totals the number of tests that passed or failed.
It's possible to mark a test as ignored so it doesn't run in a particular instance; we'll cover that in "Ignoring Some Tests Unless Specifically Requested". Because we haven't done that here, the summary shows 0 ignored
. We can also pass an argument to the cargo test
command to run only tests whose name matches a string; this is called filtering and we'll cover it in "Running a Subset of Tests by Name". Here we haven't filtered the tests being run, so the end of the summary shows 0 filtered out
.
The 0 measured
statistic is for benchmark tests that measure performance. Benchmark tests are, as of this writing, only available in nightly Rust. See the documentation about benchmark tests at https://doc.rust-lang.org/unstable-book/library-features/test.html to learn more.
The next part of the test output starting at Doc-tests adder
[4] is for the results of any documentation tests. We don't have any documentation tests yet, but Rust can compile any code examples that appear in our API documentation. This feature helps keep your docs and your code in sync! We'll discuss how to write documentation tests in "Documentation Comments as Tests". For now, we'll ignore the Doc-tests
output.
Let's start to customize the test to our own needs. First, change the name of the it_works
function to a different name, such as exploration
, like so:
Filename: src/lib.rs
#[cfg(test)]
mod tests {
#[test]
fn exploration() {
let result = 2 + 2;
assert_eq!(result, 4);
}
}
Then run cargo test
again. The output now shows exploration
instead of it_works
:
running 1 test
test tests::exploration ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s
Now we'll add another test, but this time we'll make a test that fails! Tests fail when something in the test function panics. Each test is run in a new thread, and when the main thread sees that a test thread has died, the test is marked as failed. In Chapter 9, we talked about how the simplest way to panic is to call the panic!
macro. Enter the new test as a function named another
, so your src/lib.rs
file looks like Listing 11-3.
Filename: src/lib.rs
#[cfg(test)]
mod tests {
#[test]
fn exploration() {
assert_eq!(2 + 2, 4);
}
#[test]
fn another() {
panic!("Make this test fail");
}
}
Listing 11-3: Adding a second test that will fail because we call the panic!
macro
Run the tests again using cargo test
. The output should look like Listing 11-4, which shows that our exploration
test passed and another
failed.
running 2 tests
test tests::exploration ... ok
1 test tests::another ... FAILED
2 failures:
---- tests::another stdout ----
thread 'main' panicked at 'Make this test fail', src/lib.rs:10:9
note: run with `RUST_BACKTRACE=1` environment variable to display
a backtrace
3 failures:
tests::another
4 test result: FAILED. 1 passed; 1 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s
error: test failed, to rerun pass '--lib'
Listing 11-4: Test results when one test passes and one test fails
Instead of ok
, the line test tests::another
shows FAILED
[1]. Two new sections appear between the individual results and the summary: the first [2] displays the detailed reason for each test failure. In this case, we get the details that another
failed because it panicked at 'Make this test fail'
on line 10 in the src/lib.rs
file. The next section [3] lists just the names of all the failing tests, which is useful when there are lots of tests and lots of detailed failing test output. We can use the name of a failing test to run just that test to more easily debug it; we'll talk more about ways to run tests in "Controlling How Tests Are Run".
The summary line displays at the end [4]: overall, our test result is FAILED
. We had one test pass and one test fail.
Now that you've seen what the test results look like in different scenarios, let's look at some macros other than panic!
that are useful in tests.
Checking Results with the assert! Macro
The assert!
macro, provided by the standard library, is useful when you want to ensure that some condition in a test evaluates to true
. We give the assert!
macro an argument that evaluates to a Boolean. If the value is true
, nothing happens and the test passes. If the value is false
, the assert!
macro calls panic!
to cause the test to fail. Using the assert!
macro helps us check that our code is functioning in the way we intend.
In Listing 5-15, we used a Rectangle
struct and a can_hold
method, which are repeated here in Listing 11-5. Let's put this code in the src/lib.rs
file, then write some tests for it using the assert!
macro.
Filename: src/lib.rs
#[derive(Debug)]
struct Rectangle {
width: u32,
height: u32,
}
impl Rectangle {
fn can_hold(&self, other: &Rectangle) -> bool {
self.width > other.width && self.height > other.height
}
}
Listing 11-5: Using the Rectangle
struct and its can_hold
method from Chapter 5
The can_hold
method returns a Boolean, which means it's a perfect use case for the assert!
macro. In Listing 11-6, we write a test that exercises the can_hold
method by creating a Rectangle
instance that has a width of 8 and a height of 7 and asserting that it can hold another Rectangle
instance that has a width of 5 and a height of 1.
Filename: src/lib.rs
#[cfg(test)]
mod tests {
1 use super::*;
#[test]
2 fn larger_can_hold_smaller() {
3 let larger = Rectangle {
width: 8,
height: 7,
};
let smaller = Rectangle {
width: 5,
height: 1,
};
4 assert!(larger.can_hold(&smaller));
}
}
Listing 11-6: A test for can_hold
that checks whether a larger rectangle can indeed hold a smaller rectangle
Note that we've added a new line inside the tests
module: use super::*;
[1]. The tests
module is a regular module that follows the usual visibility rules we covered in "Paths for Referring to an Item in the Module Tree". Because the tests
module is an inner module, we need to bring the code under test in the outer module into the scope of the inner module. We use a glob here, so anything we define in the outer module is available to this tests
module.
We've named our test larger_can_hold_smaller
[2], and we've created the two Rectangle
instances that we need [3]. Then we called the assert!
macro and passed it the result of calling larger.can_hold(&smaller)
[4]. This expression is supposed to return true
, so our test should pass. Let's find out!
running 1 test
test tests::larger_can_hold_smaller ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s
It does pass! Let's add another test, this time asserting that a smaller rectangle cannot hold a larger rectangle:
Filename: src/lib.rs
#[cfg(test)]
mod tests {
use super::*;
#[test]
fn larger_can_hold_smaller() {
--snip--
}
#[test]
fn smaller_cannot_hold_larger() {
let larger = Rectangle {
width: 8,
height: 7,
};
let smaller = Rectangle {
width: 5,
height: 1,
};
assert!(!smaller.can_hold(&larger));
}
}
Because the correct result of the can_hold
function in this case is false
, we need to negate that result before we pass it to the assert!
macro. As a result, our test will pass if can_hold
returns false
:
running 2 tests
test tests::larger_can_hold_smaller ... ok
test tests::smaller_cannot_hold_larger ... ok
test result: ok. 2 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s
Two tests that pass! Now let's see what happens to our test results when we introduce a bug in our code. We'll change the implementation of the can_hold
method by replacing the greater-than sign with a less-than sign when it compares the widths:
--snip--
impl Rectangle {
fn can_hold(&self, other: &Rectangle) -> bool {
self.width < other.width && self.height > other.height
}
}
Running the tests now produces the following:
running 2 tests
test tests::smaller_cannot_hold_larger ... ok
test tests::larger_can_hold_smaller ... FAILED
failures:
---- tests::larger_can_hold_smaller stdout ----
thread 'main' panicked at 'assertion failed:
larger.can_hold(&smaller)', src/lib.rs:28:9
note: run with `RUST_BACKTRACE=1` environment variable to display
a backtrace
failures:
tests::larger_can_hold_smaller
test result: FAILED. 1 passed; 1 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s
Our tests caught the bug! Because larger.width
is 8
and smaller.width
is 5
, the comparison of the widths in can_hold
now returns false
: 8 is not less than 5.
Testing Equality with the assert_eq! and assert_ne! Macros
A common way to verify functionality is to test for equality between the result of the code under test and the value you expect the code to return. You could do this by using the assert!
macro and passing it an expression using the ==
operator. However, this is such a common test that the standard library provides a pair of macros---assert_eq!
and assert_ne!
---to perform this test more conveniently. These macros compare two arguments for equality or inequality, respectively. They'll also print the two values if the assertion fails, which makes it easier to see why the test failed; conversely, the assert!
macro only indicates that it got a false
value for the ==
expression, without printing the values that led to the false
value.
In Listing 11-7, we write a function named add_two
that adds 2
to its parameter, then we test this function using the assert_eq!
macro.
Filename: src/lib.rs
pub fn add_two(a: i32) -> i32 {
a + 2
}
#[cfg(test)]
mod tests {
use super::*;
#[test]
fn it_adds_two() {
assert_eq!(4, add_two(2));
}
}
Listing 11-7: Testing the function add_two
using the assert_eq!
macro
Let's check that it passes!
running 1 test
test tests::it_adds_two ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s
We pass 4
as the argument to assert_eq!
, which is equal to the result of calling add_two(2)
. The line for this test is test tests::it_adds_two ... ok
, and the ok
text indicates that our test passed!
Let's introduce a bug into our code to see what assert_eq!
looks like when it fails. Change the implementation of the add_two
function to instead add 3
:
pub fn add_two(a: i32) -> i32 {
a + 3
}
Run the tests again:
running 1 test
test tests::it_adds_two ... FAILED
failures:
---- tests::it_adds_two stdout ----
1 thread 'main' panicked at 'assertion failed: `(left == right)`
2 left: `4`,
3 right: `5`', src/lib.rs:11:9
note: run with `RUST_BACKTRACE=1` environment variable to display
a backtrace
failures:
tests::it_adds_two
test result: FAILED. 0 passed; 1 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s
Our test caught the bug! The it_adds_two
test failed, and the message tells us that the assertion that failed was assertion failed:
(left == right)`[1] and what the
left[2] and
right[3] values are. This message helps us start debugging: the
leftargument was
4but the
rightargument, where we had
add_two(2), was
5`. You can imagine that this would be especially helpful when we have a lot of tests going on.
Note that in some languages and test frameworks, the parameters to equality assertion functions are called expected
and actual
, and the order in which we specify the arguments matters. However, in Rust, they're called left
and right
, and the order in which we specify the value we expect and the value the code produces doesn't matter. We could write the assertion in this test as assert_eq!(add_two(2), 4)
, which would result in the same failure message that displays assertion failed:
(left == right)``.
The assert_ne!
macro will pass if the two values we give it are not equal and fail if they're equal. This macro is most useful for cases when we're not sure what a value will be, but we know what the value definitely shouldn't be. For example, if we're testing a function that is guaranteed to change its input in some way, but the way in which the input is changed depends on the day of the week that we run our tests, the best thing to assert might be that the output of the function is not equal to the input.
Under the surface, the assert_eq!
and assert_ne!
macros use the operators ==
and !=
, respectively. When the assertions fail, these macros print their arguments using debug formatting, which means the values being compared must implement the PartialEq
and Debug
traits. All primitive types and most of the standard library types implement these traits. For structs and enums that you define yourself, you'll need to implement PartialEq
to assert equality of those types. You'll also need to implement Debug
to print the values when the assertion fails. Because both traits are derivable traits, as mentioned in Listing 5-12, this is usually as straightforward as adding the #[derive(PartialEq, Debug)]
annotation to your struct or enum definition. See Appendix C for more details about these and other derivable traits.
Adding Custom Failure Messages
You can also add a custom message to be printed with the failure message as optional arguments to the assert!
, assert_eq!
, and assert_ne!
macros. Any arguments specified after the required arguments are passed along to the format!
macro (discussed in "Concatenation with the + Operator or the format! Macro"), so you can pass a format string that contains {}
placeholders and values to go in those placeholders. Custom messages are useful for documenting what an assertion means; when a test fails, you'll have a better idea of what the problem is with the code.
For example, let's say we have a function that greets people by name and we want to test that the name we pass into the function appears in the output:
Filename: src/lib.rs
`rust
pub fn greeting(name: &str) -> String {
format!("Hello {name}!")
}
[cfg(test)]
mod tests {
use super::*;
#[test]
fn greeting_contains_name() {
let result = greeting("Carol");
assert!(result.contains("Carol"));
}
}
`
The requirements for this program haven't been agreed upon yet, and we're pretty sure the Hello
text at the beginning of the greeting will change. We decided we don't want to have to update the test when the requirements change, so instead of checking for exact equality to the value returned from the greeting
function, we'll just assert that the output contains the text of the input parameter.
Now let's introduce a bug into this code by changing greeting
to exclude name
to see what the default test failure looks like:
`rust
pub fn greeting(name: &str) -> String {
String::from("Hello!")
}
`
Running this test produces the following:
running 1 test
test tests::greeting_contains_name ... FAILED
failures:
---- tests::greeting_contains_name stdout ----
thread 'main' panicked at 'assertion failed:
result.contains(\"Carol\")', src/lib.rs:12:9
note: run with `RUST_BACKTRACE=1` environment variable to display
a backtrace
failures:
tests::greeting_contains_name
This result just indicates that the assertion failed and which line the assertion is on. A more useful failure message would print the value from the greeting
function. Let's add a custom failure message composed of a format string with a placeholder filled in with the actual value we got from the greeting
function:
#[test]
fn greeting_contains_name() {
let result = greeting("Carol");
assert!(
result.contains("Carol"),
"Greeting did not contain name, value was `{result}`"
);
}
Now when we run the test, we'll get a more informative error message:
---- tests::greeting_contains_name stdout ----
thread 'main' panicked at 'Greeting did not contain name, value
was `Hello!`', src/lib.rs:12:9
note: run with `RUST_BACKTRACE=1` environment variable to display
a backtrace
We can see the value we actually got in the test output, which would help us debug what happened instead of what we were expecting to happen.
Checking for Panics with should_panic
In addition to checking return values, it's important to check that our code handles error conditions as we expect. For example, consider the Guess
type that we created in Listing 9-13. Other code that uses Guess
depends on the guarantee that Guess
instances will contain only values between 1 and 100. We can write a test that ensures that attempting to create a Guess
instance with a value outside that range panics.
We do this by adding the attribute should_panic
to our test function. The test passes if the code inside the function panics; the test fails if the code inside the function doesn't panic.
Listing 11-8 shows a test that checks that the error conditions of Guess::new
happen when we expect them to.
// src/lib.rs
pub struct Guess {
value: i32,
}
impl Guess {
pub fn new(value: i32) -> Guess {
if value < 1 || value > 100 {
panic!(
"Guess value must be between 1 and 100, got {}.",
value
);
}
Guess { value }
}
}
#[cfg(test)]
mod tests {
use super::*;
#[test]
#[should_panic]
fn greater_than_100() {
Guess::new(200);
}
}
Listing 11-8: Testing that a condition will cause a panic!
We place the #[should_panic]
attribute after the #[test]
attribute and before the test function it applies to. Let's look at the result when this test passes:
running 1 test
test tests::greater_than_100 - should panic ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s
Looks good! Now let's introduce a bug in our code by removing the condition that the new
function will panic if the value is greater than 100:
// src/lib.rs
--snip--
impl Guess {
pub fn new(value: i32) -> Guess {
if value < 1 {
panic!(
"Guess value must be between 1 and 100, got {}.",
value
);
}
Guess { value }
}
}
When we run the test in Listing 11-8, it will fail:
running 1 test
test tests::greater_than_100 - should panic ... FAILED
failures:
---- tests::greater_than_100 stdout ----
note: test did not panic as expected
failures:
tests::greater_than_100
test result: FAILED. 0 passed; 1 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s
We don't get a very helpful message in this case, but when we look at the test function, we see that it's annotated with #[should_panic]
. The failure we got means that the code in the test function did not cause a panic.
Tests that use should_panic
can be imprecise. A should_panic
test would pass even if the test panics for a different reason from the one we were expecting. To make should_panic
tests more precise, we can add an optional expected
parameter to the should_panic
attribute. The test harness will make sure that the failure message contains the provided text. For example, consider the modified code for Guess
in Listing 11-9 where the new
function panics with different messages depending on whether the value is too small or too large.
// src/lib.rs
--snip--
impl Guess {
pub fn new(value: i32) -> Guess {
if value < 1 {
panic!(
"Guess value must be greater than or equal to 1, got {}.",
value
);
} else if value > 100 {
panic!(
"Guess value must be less than or equal to 100, got {}.",
value
);
}
Guess { value }
}
}
#[cfg(test)]
mod tests {
use super::*;
#[test]
#[should_panic(expected = "less than or equal to 100")]
fn greater_than_100() {
Guess::new(200);
}
}
Listing 11-9: Testing for a panic!
with a panic message containing a specified substring
This test will pass because the value we put in the should_panic
attribute's expected
parameter is a substring of the message that the Guess::new
function panics with. We could have specified the entire panic message that we expect, which in this case would be Guess value must be less than or equal to 100, got 200
. What you choose to specify depends on how much of the panic message is unique or dynamic and how precise you want your test to be. In this case, a substring of the panic message is enough to ensure that the code in the test function executes the else if value > 100
case.
To see what happens when a should_panic
test with an expected
message fails, let's again introduce a bug into our code by swapping the bodies of the if value < 1
and the else if value > 100
blocks:
// src/lib.rs
--snip--
if value < 1 {
panic!(
"Guess value must be less than or equal to 100, got {}.",
value
);
} else if value > 100 {
panic!(
"Guess value must be greater than or equal to 1, got {}.",
value
);
}
--snip--
This time when we run the should_panic
test, it will fail:
running 1 test
test tests::greater_than_100 - should panic ... FAILED
failures:
---- tests::greater_than_100 stdout ----
thread 'main' panicked at 'Guess value must be greater than or equal to 1, got
200.', src/lib.rs:13:13
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
note: panic did not contain expected string
panic message: `"Guess value must be greater than or equal to 1, got
200."`,
expected substring: `"less than or equal to 100"`
failures:
tests::greater_than_100
test result: FAILED. 0 passed; 1 failed; 0 ignored; 0 measured; 0 filtered out;
finished in 0.00s
The failure message indicates that this test did indeed panic as we expected, but the panic message did not include the expected string 'Guess value must be less than or equal to 100'
. The panic message that we did get in this case was Guess value must be greater than or equal to 1, got 200
. Now we can start figuring out where our bug is!
Using Result<T, E> in Tests
Our tests so far all panic when they fail. We can also write tests that use Result<T, E>
! Here's the test from Listing 11-1, rewritten to use Result<T, E>
and return an Err
instead of panicking:
Filename: src/lib.rs
`rust
[cfg(test)]
mod tests {
#[test]
fn it_works() -> Result<(), String> {
if 2 + 2 == 4 {
Ok(())
} else {
Err(String::from("two plus two does not equal four"))
}
}
}
`
The it_works
function now has the Result<(), String>
return type. In the body of the function, rather than calling the assert_eq!
macro, we return Ok(())
when the test passes and an Err
with a String
inside when the test fails.
Writing tests so they return a Result<T, E>
enables you to use the question mark operator in the body of tests, which can be a convenient way to write tests that should fail if any operation within them returns an Err
variant.
You can't use the #[should_panic]
annotation on tests that use Result<T, E>
. To assert that an operation returns an Err
variant, don't use the question mark operator on the Result<T, E>
value. Instead, use assert!(value.is_err())
.
Now that you know several ways to write tests, let's look at what is happening when we run our tests and explore the different options we can use with cargo test
.
Summary
Congratulations! You have completed the How to Write Tests lab. You can practice more labs in LabEx to improve your skills.
Want to learn more?
- 🚀 Practice How to Write Tests
- 🌳 Learn the latest Rust Skill Trees
- 📖 Read More Rust Tutorials
Join our Discord or tweet us @WeAreLabEx ! 😄
Top comments (0)