DEV Community

Cover image for Building a Web server in Bash, part II - parsing HTTP
Leandro Proença
Leandro Proença

Posted on

Building a Web server in Bash, part II - parsing HTTP

In the first part of this guide, we walked through the basics of netcat nc command, from basic UNIX sockets to TCP sockets, all the way writing an HTML content inside the HTTP response body.

Now, let's go further on writing some ShellScript, towards a more sophisticated Web server that delivers features like login, homepage and logout.


Just a static response

So far, we've seen just a static response being sent to the socket.

# -N: closes the client connection when there's no more data to read
$ echo -e 'HTTP/1.1 200\r\n\r\n\r\n<h1>PONG</h1>' | nc -lvN 3000

Listening on 0.0.0.0 3000
Enter fullscreen mode Exit fullscreen mode

No matter what kind of requests we send, the response is still always the same:

$ curl http://localhost:3000/
<h1>PONG</h1>

$ curl http://localhost:3000/users
<h1>PONG</h1>

$ curl -X POST http://localhost:3000/login -d name=Leandro
<h1>PONG</h1>
Enter fullscreen mode Exit fullscreen mode

Providing a dynamic response

We have to find a way to make our response dynamic. It can't be a static string. But how do we achieve that?

Let's think for a bit about a potential solution.

  • netcat's STDIN is redirected to some structure like a "queue" (FIFO)
  • netcat reads a request message from the socket
  • the request message is processed then a response is sent to the STDIN. In this case, to the FIFO structure
  • as the FIFO structure contains the STDIN of the netcat process, it can be then sent to the socket

What's this "FIFO" structure we have learned in the previous posts? Yes, named pipes!

That's a great solution, isn't it?

Using FIFO as the response

Okay, time to write the very first version of our web server.

$ mkfifo response
$ cat response | nc -lvN 3000

Listening on 0.0.0.0 3000
Enter fullscreen mode Exit fullscreen mode

In a second window, perform the HTTP request:

$ curl http://localhost:3000/
Enter fullscreen mode Exit fullscreen mode

We can see the request message arriving to the server's STDOUT but any response is sent back. Because it's a FIFO, and we haven't yet written any message to the FIFO, right?

In a third window, try the following:

$ echo -e 'HTTP/1.1 200\r\n\r\n\r\n<h1>PONG</h1>' > response
Enter fullscreen mode Exit fullscreen mode

Note that in the second window (HTTP client), the message <h1>PONG</h1> arrives. And in the first window (the HTTP server), the connection is closed as expected.

However, the response not yet dynamic. We are writing by ourselves directly in the FIFO.

We should instead process the request from the STDOUT, parse it somehow, do something, and afterwards, write a dynamic response to the FIFO. That will be our HTTP response.

All this abstractions should live in the server side process. Time to dive in shell scripting for real.


Processing the HTTP request

Remember first that the HTTP request is sent from the client side, going through the socket, and finally sent to the netcat STDOUT.

In order to write a more readable code, we should wrap the request processing in a separate shell function.

Here's the first version of our server:

#!/bin/bash

### Create the response FIFO
rm -f response
mkfifo response

function handleRequest() {
    # 1) Process the request
    # 2) Route request to the correct handler
    # 3) Build a response based on the request
    # 4) Send the response to the named pipe (FIFO)
}

echo 'Listening on 3000...'

cat response | nc -lN 3000 | handleRequest
Enter fullscreen mode Exit fullscreen mode

That's pretty much what we need to build the web server. For the sake of simplicity, we're going to keep all the code inside the function handleRequest, as we are free to refactor along the way.

Inside the handleRequest we should write code that processes the request, parses it and builds the appropriate response which can be sent to the named pipe (FIFO).

As we are piping netcat's STDOUT to the function's STDIN, how do we read the HTTP request?

_Yes, using the read command or cat. _

Though, because we have to parse each line of the HTTP request, we're going to use the read command in a loop, but first let's recap how an HTTP message looks like.

Anatomy of an HTTP request message

GET / HTTP/1.1\r\n
Enter fullscreen mode Exit fullscreen mode

This is the very first line, also called headline. It's a pattern {http_verb} {path} {protocol_version} followed by a \r\n.

Next, the following lines represent the HTTP headers, which can be empty as they are not mandatory. It's a pattern of {header_name}: {header_value} followed by a \r\n:

Content-Type: text/html\r\n
Connection: keep-alive\r\n
Enter fullscreen mode Exit fullscreen mode

Now, the next line is just a single \r\n (empty line). It's mandatory, because it separates the headers from the remaining HTTP message: the HTTP body.

\r\n
Enter fullscreen mode Exit fullscreen mode

Finally, the HTTP request body, which is NOT mandatory:

<h1>PING</h1>
Enter fullscreen mode Exit fullscreen mode

Let's see the entire HTTP request message:

GET / HTTP/1.1\r\n
Content-Type: text/html\r\n
\r\n
<h1>PING</h1>
Enter fullscreen mode Exit fullscreen mode

Anatomy of an HTTP response message

It's also important to understand the HTTP response format. It's quite similar to the HTTP request format, with a slightly difference in the headline.

Please note that the headers, empty line and the body have the same format for both request and response.

HTTP/1.1 200\r\n # {protocol_version} {status_code}
Content-Type: text/html\r\n
\r\n
<h1>PONG</h1>
Enter fullscreen mode Exit fullscreen mode

Reading the HTTP request

We should read line by line in a loop until we find the empty line \r\n (we'll see how to read the HTTP body later in this guide).

function handleRequest() {
  while read line; do
    echo $line
    trline=`echo $line | tr -d '[\r\n]'`

    if [ -z "$trline" ]; then
      break
    fi
  done

  echo -e 'HTTP/1.1 200\r\n\r\n\r\n</h1>PONG</h1>' > response
}
Enter fullscreen mode Exit fullscreen mode

Note the line:

trline=`echo $line | tr -d '[\r\n]'`
Enter fullscreen mode Exit fullscreen mode

...which removes the \r\n. Next, in case the $trline is empty:

# -z means empty
if [ -z "$trline" ]; then
  break
fi
Enter fullscreen mode Exit fullscreen mode

...we break the loop and keep executing the script after the loop, till we write the response to the FIFO:

echo -e 'HTTP/1.1 200\r\n\r\n\r\n</h1>PONG</h1>' > response
Enter fullscreen mode Exit fullscreen mode

An improved version could be using the if one-liner. It's less verbose, and could be as follows:

[ -z "$trline" ] && break
Enter fullscreen mode Exit fullscreen mode

Okay, that's great and all, but the response is not yet dynamic as we expect.

Trust me, we are almost there. Let's start processing the request using regular expressions (regex) in each request line.

One could use a lot of alternatives to match regular expressions in bash. At this guide, we're going to use the sed command. It's very powerful and flexible.

Inside the loop, we check if the line matches the headline regex. In case is does, we save the verb & path in the REQUEST variable:

while read line; do
  echo $line
  trline=`echo $line | tr -d '[\r\n]'`

  [ -z "$trline" ] && break

  HEADLINE_REGEX='(.*?)\s(.*?)\sHTTP.*?'

  [[ "$trline" =~ $HEADLINE_REGEX ]] &&
    REQUEST=$(echo $trline | sed -E "s/$HEADLINE_REGEX/\1 \2/")
done
Enter fullscreen mode Exit fullscreen mode

Now, the dynamic response, outside the reading loop:

case "$REQUEST" in
  "GET /") RESPONSE="HTTP/1.1 200 OK\r\nContent-Type: text/html\r\n\r\n</h1>PONG</h1>" ;;
        *) RESPONSE="HTTP/1.1 404 NotFound\r\n\r\n\r\nNot Found" ;;
esac

echo -e $RESPONSE > response
Enter fullscreen mode Exit fullscreen mode

Using the above switch-case structure, we can check if:

  • the request matches GET /, which we respond the message <h1>PONG</h1>
  • otherwise, we respond a 404 Not Found message

Such YAY! Our web server is taking some good shape.


Wrapping up

We just learned a bit about the HTTP message format as well as some shell scripting, making our server to respond dynamically.

In the upcoming parts we expect to enhance our function handleRequest as we add more capabilities to it.

Top comments (2)

Collapse
 
coditdoc profile image
Codeitdoc7

Building a web server in bash you're insane 🐱.
Inspiring work

Collapse
 
adam_danischewski_95f2b92 profile image
Adam Danischewski

Nice tutorial - looks good. I rewrote one just recently originally thought about using netcat but opted for socat easier plus no worries about different netcat flavors/options. Mine is a file server, using dd to stream binary so you can listen to music/watch videos. You can see it here, feel free to hack it up: github.com/BashBuddy/bashbuddy