Introduction to React RAW APIs

Hello World 👋

Welcome to the third article of the My Review of Kent C. Dodd's EpicReact.Dev Series which is based on the workshop material from EpicReact.Dev by Kent C. Dodds. If you haven't read the previous articles of the series yet, please go and read them before continuing through this article.

Here are the previous articles.

1. Epic React: Introduction
2. Epic React: Javascript You Need To Know For React

In this article, You are going to learn the very basics of React. We will just be working with basic HTML and javascript using React raw APIs. We will not even be using any JSX in this article(If you don't know what JSX is, don't worry, we will learn about it in the next article.) You will see why it is difficult to work with React raw APIs. Many people skip over these fundamentals before learning React, but it is important to know about these abstractions to understand some things in React which we will see in the next article.

We will follow the similar format of the workshop - meaning for every topic, we will first introduce what we are trying to achieve, then we will see how to achieve that.

Table of Contents

• Basic JS "Hello World"
  • Introduction
  • Generate DOM Nodes
• Intro to Raw React APIs
  • Introduction
  • Raw React APIs
  • Nesting Elements

Basic JS "Hello World"

Introduction

Our goal is to render Hello World using basic javascript.

Our HTML currently has the following

<div id="root"></div>

We want our HTML to be:

<div id="root">
    <div class="container">Hello World</div>
</div>

Generate DOM Nodes

We can achieve the above result by making use of Javascript's document API.

// Fetches the element with id as `root` from DOM
const rootElement = document.getElementById("root")

// Creates an element with `div` tag
const helloWorldElement = document.createElement("div")
helloWorldElement.textContent = "Hello World"
helloWorldElement.className = "container"

// Appends the helloWorldElement to the rootElement
rootElement.append(helloWorldElement)

Let's break down what we are doing here.

1. Get the element with id as root from DOM.
2. Create a new DOM element and then set its properties.
3. Append the newly created element to the root element that we fetched from DOM.

Even though the above code is very clear, I broke it down into steps, because in the following section, we will use these exact steps to achieve this, but by using React APIs.

Intro to Raw React APIs

Introduction 2

React uses the same document API that we have seen before under the hood. But it abstracts it away and gives you easy to use and intuitive API to work with

Let's try to create the same hello world markup that we did before, this time using React.

Raw React APIs

// Fetches the element with id as `root` from DOM
const rootElement = document.getElementById("root")

// Creates an element with `div` tag
const helloWorldElement = React.createElement("div", { 
    className: "container", 
    children: "Hello World" 
})

// Appends the helloWorldElement to the rootElement
ReactDOM.render(helloWorldElement, rootElement)

Before we understand this code, observe that we have used React and ReactDOM, which are not a part of basic javascript. Hence, they should be added before they become available to us.

Let's add them using their CDN scripts. We will be using unpkg's CDN.

<script src="https://unpkg.com/react@16.7.0/umd/react.production.min.js"></script>
<script src="https://unpkg.com/react-dom@16.7.0/umd/react-dom.production.min.js"></script>

After adding this, we will be able to access React and ReactDOM from within javascript.

Let's try to understand the code now.

1. Get the element with id as root from DOM.
   • This part did not change. We are still using the document API to get the root element.
2. Create a new DOM element and then set its properties.
   • Here we are introducing the new React API called React.createElement().
   • It takes two arguments
     1. HTML tag that we want to create.
     2. Properties and the corresponding values that we want to set.
   • Note that we have introduced a new property called children.
     • children is basically a replacement of what we want inside of the HTML tag that we create.
     • So, if we want to render <div>Hello World</div>, we will create a React element with a div tag and set the children's property to Hello World.
3. Append the newly created element to the root element that we fetched from DOM.
   • We will be using ReactDOM for rendering. The corresponding API is ReactDOM.render()
   • It also takes two arguments.
     • Element that we want to append.
     • Element which we want to append the above element to.
   • So, if we want to append element1 to element2. You would do ReactDOM.render(element1, element2).

Can you see and appreciate how similar both the React APIs and document APIs are. With the knowledge that we have let's try to create the below markup using React.

Nesting Elements

Lets try to create the following markup with React.

<div id="root">
    <div>
        <span>Hello</span>
        <span>World</span>
    </div>
</div>

Before doing this, you need to know that the children property that we have seen before will also accept an array as its value.
For example, both of the following calls will produce the same HTML output.

// 1.
React.createElement("div", { children: "Hello World" })

// 2.
React.createElement("div", { children: ["Hello", " ", "World"] })

Now that we know this, let's try to create the given markup.

// Fetches the element with id as `root`
const rootElement = document.getElementById("root")

// Creates a `span` element with content as `Hello`
const helloElement = React.createElement("span", {children: "Hello"})

// Creates a `span` element with content as `World`
const worldElement = React.createElement("span", {children: "World"})

// Let's put the above two elements in to a single div
const helloWorldElement = React.createElement("div", {
    children: [helloElement, worldElement]
})

The above code will create the HTML markup that we want.

Note:

React.createElement can also take more than 2 arguments.
The following two calls generate the same thing.

// 1.
React.createElement("div", {children: [element1, element2, element3]})

// 2.
React.createElement("div", {}, element1, element2, element3)

So, you can essentially unpack the children array and then add them as other arguments.

That's it for now.

What's Next

In this article, you saw how verbose React raw APIs are. So, it becomes a little difficult to write code like this when there are a lot of elements and each element has different properties.

That is why React gave us a way to simplify this and write the code in a format called JSX which looks a bit similar to HTML. In the next article, we will see all about JSX and we will also see how to create custom components and style them with CSS.

Until Next Time 👋

You might also like the following articles:

• How I Gave A Modern Look For HackerNews Feed
• Javascript You Need To Know For React
• My Review of Kent C. Dodds's EpicReact.Dev: Introduction
• React Fundamentals
• Create Your Own Super Simple URL Shortener
• Why you should start using HSL color format
• TIL: Hyphenate when you justify text
• Embed Youtube Videos into Your Markdown Editor
• Babel Plugin To Remove Console Logs In Production
• noopener, noreferrer, and nofollow - When to use them? How can these prevent Phishing Attacks?
• Create New CodePens and CodeSandboxes Instantly With ZERO clicks
• How to Import SVGs into your Next.js Project?
• Create Custom Markdown Parser
• Optimize Your Website For Social Media Platforms
• Add Typescript to your Next.js project

If this was helpful to you, Please Like and Share so that it reaches others as well. To get email notifications on my latest articles, please subscribe to my blog by hitting the Subscribe button at the top of the page. You can also follow me on twitter @pbteja1998.

Links and References:

• EpicReact.Dev - Series of workshops by Kent C. Dodds based on which this blog post series is being written.
• React Fundamentals Workshop Repo - Github Repo if you want to do the self-paced workshop yourself.
• React Fundamentals Workshop Demo - Production application of the above workshop repo.