DEV Community

Cover image for Committing Changes within VS Code
Tyler V. (he/him)
Tyler V. (he/him)

Posted on • Updated on • Originally published at terabytetiger.com

Committing Changes within VS Code

Introduction

While my earlier post outlines pushing commits using the terminal, since writing that article I have largely stopped using my terminal for pushing commits and do so directly in VS Code's git panel! Since I find pushing changes within VS Code easier, I decided to write a companion piece outlining how to handle the commits within VS Code.

A handful of steps from this article will be very similar to part 2 of the series, but this time around we will be doing as much as possible via VS Code!

Prerequisites

Setup

  1. Navigate your browser to https://github.com/12vanblart/color-themes
  2. Click the "Fork" button in the top right Github's Fork Button
  3. Once Github is done forking the repository, click the "Clone or Download" button and copy the url in the dialog box. Clone URL dialog box
  4. Open a new VS Code Window
  5. You should see an option on the "Getting Started" page that opens by default called "Clone Git Repository" - click this! VS Code welcome page options showing option called Clone Git Repository
  6. Enter the URL copied in step 3 into the prompt that is now at the top of your screen and press enter VS Code prompt with Clone GitHub URL filled in
  7. This will open a File Explorer window - navigate to a folder where you would like this project to be saved. A folder called 'color-themes' will be created with the files from your repository in the selected folder.
  8. Once you select a folder, a notification in VS Code will prompt you asking if you'd like to open the repository - you can click "Open" or "Open in New Window" to jump to the repository.
    Toast notification in VS Code asking to open the new repository

  9. Now we'll create your branch by clicking in the bottom left of VS Code where it says "main" and a prompt will appear at the top of the screen. Type in the name you'd like for your branch and click "Create New Branch"
    Bottom left corner of VS Code where the Branch selection is made

  10. Open the integrated terminal in VS Code under the Ribbon > Terminal > New Terminal and run the command npm install to install the packages needed to test running the service.

    In the past I've had issues with the VS Code Terminal not opening while Hyper was installed - if you have Hyper installed you may need to navigate to the directory and run these commands via Hyper.
    VS Code Integrated Terminal running npm install command

  11. Once npm install completes, run npm run serve to start a local copy of the app. You can stop the local server at any point with Ctrl + C and answering y to "Would you like to terminate the batch job?"

  12. Open your web browser of choice and navigate to localhost:8080!

At this point you should see the same thing as on themes.tvanblargan.com.

Adding a theme

There are two files that you will need to update to add a new theme - src/assets/themes.css and src/components/ThemePicker.vue. These files were created when you used the git clone command above. Don't worry if you don't know any Vue, the changes you need to make to that file won't be anything too intense!

Editing ThemePicker.vue

In this file, you'll see a list of <Theme> components starting on line 28. Add a new line after all existing <Theme>'s as follows:

<Theme theme-name="your-theme-name" display-name="Your Theme Name" contributor="githubUsername"/>
Enter fullscreen mode Exit fullscreen mode

replacing your-theme-name with the class name (see Editing themes.css below), Your Theme Name with whatever you want your theme's name to display as on the option list, and githubUsername with your Github username.

Editing themes.css

On line 15, you'll want to copy in the following (make sure your theme is at the top of the file after the comments end):

.your-theme-name {
  --primary: #fff;
  --secondary: #fff;
  --accent: #fff;
  --link: #fff;
  --text: #fff;
}
Enter fullscreen mode Exit fullscreen mode

You'll update your-theme-name to be whatever you want your theme's class to be called (check that there isn't already a theme with your chosen name!).

Next, update the #fff's to be your colors of choice. If you're not sure where to start picking colors, I recommend playing around with Pallettte

Once you select your theme, saving themes.css will update localhost instantly without needing to reselect your new theme!

Requirements for accepted PR's

Note that each time a theme is selected, the A11y card's values are recalculated and updated to reflect the contrast ratio between various theme colors. In order for your theme to be approved, each of these numbers needs to be greater than or equal to 4.5 (WCAG AA Compliant).

Committing your changes

Once you're happy with your theme and it's passing the contrast requirements, you'll want to save your changes so they can be added to the live site and everyone can see your awesome theme!

To do this, open the git panel in VS Code:
Git panel open in VS Code with 2 files changed

You should see both themes.css and ThemePicker.vue listed under the heading "Changes". This shows you any files that have been modified since the last commit to the file. As you hover over each of the items there will be a "+" Icon to stage the changes, and a "undo arrow" to discard the changes. Click the "+" icon for both items so they move to the "Staged Changes" Header.

VS Code git panel showing the css file as staged and indicating the add icon for ThemePicker.vue

Once both files are staged, we'll add a commit message in the input box above the "Staged Changes" header. Once entered, either press Ctrl + Enter or the checkmark above the input box to commit your changes!
A commit message and the checkmark highlighted to show how to commit changes

After processing for a moment, you'll see the files disappear from the list - this means your changes are committed! Time to send them to the cloud by clicking the Cloud Publish icon in the bottom left next to where it shows your branch name!

Publish Cloud icon next to the Branch name in VS Code

Once clicked, 2 syncing arrows will spin for a bit, then you'll be able to hop over to GitHub and see the changes live!

Note: After the first publish instead of showing the publish cloud icon, VS Code will show you a number next to a down arrow and a number next to an up arrow - this indicates the number of commits to be pulled from GitHub/pushed to Github and clicking either will sync your local repository with the online repository!

Image of changes to sync between GitHub and local repository. There are none to pull and 1 to push.

The rest of this article will be the same as Part 2 of this series

Making the Pull Request!

Now head to github.com and navigate to your forked repository (github.com/yourUserName/color-themes) and select the "Pull Requests" tab, then push the "New Pull request" button.

  1. Once the page loads, you'll want to make sure the dropdowns on the left are base repository: 12vanblart/color-themes and base: main and the options selected on the right are head repository: yourUserName/color-themes and compare: yourBranchName. Github Branch Comparison between 12vanblart master and stroudn1 theme
  2. Click "Create Pull Request" and fill in the details Create Pull Request Button
  3. Click "Create Pull Request" to submit your theme for review!

Top comments (0)