DEV Community

Cover image for Symfony 6 and JWT bundles: Refresh token
nabbisen
nabbisen

Posted on • Edited on • Originally published at scqr.net

Symfony 6 and JWT bundles: Refresh token

#php #symfony #security #jwt

* The cover image is originally by geralt and edited with great appreciation.

Summary

Are you interested in JSON Web Token (JWT) authentication and authorization in PHP or Symfony, one of its frameworks?

If so, this post might be helpful:

nabbisen

Symfony 6 and Lexik JWT Bundle 2: Auth with JSON Web Token

nabbisen ・ Nov 12 '22

#php #symfony #jwt #authentication

Well, lifetime of each access token should be short within practical term in order to mitigate risk on impersonation.
However, when access token is expired, what should we do? Request authentication information to users, again? It must be inconvenient in many cases, mustn't it πŸ˜…

That's where refresh token steps in.
This post shows how to implement it in Symfony with JWTRefreshTokenBundle.
Here we go.

Environment

Tutorial

Overview

Remember you need install LexikJWTAuthenticationBundle and configure your app beforehand.

The steps here are as follows:

  1. Install the bundle
  2. PHP 8 specific operation (currently)
  3. Update database
  4. Configure
  5. Testing

1. Install the bundle

JWTRefreshTokenBundle is almost in your hand with composer. Run:

$ composer require gesdinet/jwt-refresh-token-bundle
Enter fullscreen mode Exit fullscreen mode

The output started with:

Info from https://repo.packagist.org: #StandWithUkraine
Using version ^1.1 for gesdinet/jwt-refresh-token-bundle
./composer.json has been updated
Running composer update gesdinet/jwt-refresh-token-bundle
Loading composer repositories with package information
Updating dependencies
Lock file operations: 1 install, 0 updates, 0 removals
  - Locking gesdinet/jwt-refresh-token-bundle (v1.1.1)
Writing lock file
Installing dependencies from lock file (including require-dev)
Package operations: 1 install, 0 updates, 0 removals
  - Downloading gesdinet/jwt-refresh-token-bundle (v1.1.1)
  - Installing gesdinet/jwt-refresh-token-bundle (v1.1.1): Extracting archive
Generating optimized autoload files
116 packages you are using are looking for funding.
Use the `composer fund` command to find out more!
Enter fullscreen mode Exit fullscreen mode

Then it was followed by:

Symfony operations: 1 recipe (44a1f19720c3d647b7a54653d52ca981)
  -  WARNING  gesdinet/jwt-refresh-token-bundle (>=1.0): From github.com/symfony/recipes-contrib:main
    The recipe for this package comes from the "contrib" repository, which is open to community contributions.
    Review the recipe at https://github.com/symfony/recipes-contrib/tree/main/gesdinet/jwt-refresh-token-bundle/1.0
Enter fullscreen mode Exit fullscreen mode

Read the warning carefully and enter "y" to continue:

    Do you want to execute this recipe?
    [y] Yes
    [n] No
    [a] Yes for all packages, only for the current installation session
    [p] Yes permanently, never ask again for this project
    (defaults to n): y
Enter fullscreen mode Exit fullscreen mode

The rest was:

  - Configuring gesdinet/jwt-refresh-token-bundle (>=1.0): From github.com/symfony/recipes-contrib:main
Executing script cache:clear [OK]
Executing script assets:install public [OK]

 What's next? 


Some files have been created and/or updated to configure your new packages.
Please review, edit and commit them: these files are yours.

No security vulnerability advisories found
Enter fullscreen mode Exit fullscreen mode

2. Adapt it to PHP 8 (currently)

Well, there was a problem. It was unfamiliar with PHP 8 and Symfony 6 by default, because it uses annotations. However, what was required without Symfony flex was attributes.
To fix it, edit src/Entity/RefreshToken.php:

- /**
-  * @ORM\Entity
-  * @ORM\Table("refresh_tokens")
-  */
+ #[ORM\Entity]
+ #[ORM\Table(name: 'refresh_token')]
Enter fullscreen mode Exit fullscreen mode

Then run:

$ composer install
Enter fullscreen mode Exit fullscreen mode

3. Update database

You are perhaps familiar with these command lines. Run them:

$ php bin/console make:migration
$ php bin/console doctrine:migrations:migrate
Enter fullscreen mode Exit fullscreen mode

4. Configure routes and firewalls for refresh tokens

Edit config/routes.yaml

  # ...
  jwt_auth:
      path: /auth
+ jwt_refresh:
+     path: /auth/refresh
Enter fullscreen mode Exit fullscreen mode

Then edit config/packages/security.yaml

  security:
      # ...
      firewalls:
          # ...
          jwt_auth:
              pattern: ^/auth
              stateless: true
              json_login:
                  check_path: jwt_auth
                  success_handler: lexik_jwt_authentication.handler.authentication_success
                  failure_handler: lexik_jwt_authentication.handler.authentication_failure
          api:
              pattern: ^/api
              stateless: true
              jwt: ~
+             refresh_jwt:
+                 check_path: jwt_refresh
          # ...
     # Note: Only the *first* access control that matches will be used
     access_control:
         # ...
         - { path: ^/auth, roles: PUBLIC_ACCESS }
         - { path: ^/api, roles: IS_AUTHENTICATED_FULLY }
Enter fullscreen mode Exit fullscreen mode

In addition, alternatively, you may want to integrate API routes of both auth and use:

# config/routes.yaml
jwt_auth:
    path: /api/auth
jwt_refresh:
    path: /api/auth/refresh
Enter fullscreen mode Exit fullscreen mode

+

# config/packages/security.yaml
security:
    # ...
    firewalls:
        # ...
        api:
            pattern: ^/api
            stateless: true
            json_login:
                check_path: jwt_auth
                success_handler: lexik_jwt_authentication.handler.authentication_success
                failure_handler: lexik_jwt_authentication.handler.authentication_failure
            jwt: ~
            entry_point: jwt
            refresh_jwt:
                check_path: jwt_refresh
    # ...
    access_control:
        - { path: ^/api/auth, roles: PUBLIC_ACCESS }
        - { path: ^/api, roles: IS_AUTHENTICATED_FULLY }
Enter fullscreen mode Exit fullscreen mode

That's it!

5. Let's play: API access with JWT

Just as my previous post, connect to /auth with curl to get token:

$ curl -X POST \
      -H "Content-Type: application/json" \
      -d '{"username":"your-username","password":"your-password"}' \
      https://your-domain/auth
Enter fullscreen mode Exit fullscreen mode

You will get refresh token as well as access token.

{"token":"xxx.xxx.xxx","refresh_token":"xxx"}
Enter fullscreen mode Exit fullscreen mode

Gotcha 😎
Let's try a few with the refresh token!

(1) Case of missing 😩

$ curl -X POST \
      https://(your-domain)/auth/refresh
Enter fullscreen mode Exit fullscreen mode 
{"code":401,"message":"Missing JWT Refresh Token"}
Enter fullscreen mode Exit fullscreen mode

(2) Case of an invalid one 😩

$ curl -X POST \
      -d refresh_token="wrong-value" \
      https://(your-domain)/auth/refresh
Enter fullscreen mode Exit fullscreen mode 
{"code":401,"message":"JWT Refresh Token Not Found"}
Enter fullscreen mode Exit fullscreen mode

(3) Case of the valid one πŸ˜ƒ

$ curl -X POST \
      -d refresh_token="xxx" \
      https://(your-domain)/auth/refresh
Enter fullscreen mode Exit fullscreen mode 
{"token":"xxx.xxx.xxx","refresh_token":"xxx"}
Enter fullscreen mode Exit fullscreen mode

Yay, here come new tokens of yours πŸš€ 🎫🎫

Top comments (0)

Read next

benzellat_djameleddine_3 profile image

Top 10 Cybersecurity Threats You Need to Know About This Year 2024

Benzellat Djamel Eddine -

naveedsaeed profile image

Running a Database Server on EC2: Best Practices and Considerations

Muhammad Naveed -

mdarifulhaque profile image

2463. Minimum Total Distance Traveled

MD ARIFUL HAQUE -

akshayashet profile image

Minting JWT Token Using Node.js

Akshaya Mallyar Shet -